11Controlling the rest of your system
Certain buttons represent operations that cannot be learned from other remote controls. The buttons available are shown below:
RECEIVER | INPUT |
| SOURCE |
|
|
|
|
| SELECT |
|
|
|
|
|
|
|
|
|
| GUIDE | TV CONTROL | RETURN | |
|
|
|
|
|
| ||
|
|
|
| TVVOL | INPUT | TV CH | VOL |
|
|
|
|
| SELECT |
|
|
DVD/LD | TV/SAT | DVR/VCR | TVCONT |
|
|
|
|
| MULTICONTROL |
| DTVON/OFF | REC | DTVINFO | MUTE | |
|
|
|
| ||||
CD | TUNER | RECEIVER |
|
|
|
| |
|
|
|
| TUNER |
| RECSTOP |
|
|
|
|
| DISPLAY |
|
| |
|
|
|
| MPX | CHRETURN | HDD | DVD |
|
|
|
| AUDIO | SUBTITLE | ||
|
|
|
|
|
| CH | CH |
|
|
|
|
| RECEIVER CONTROL |
| |
|
|
|
| THX | STANDARD | ADV.SURR | STEREO |
|
|
|
|
| ACOUSTIC | SIGNAL | MIDNIGHT/ |
| FL DIMMER | SR | AUTOSURR | EQ | SELECT | LOUDNESS | |
| +10 |
| DISC |
|
|
|
|
|
|
| ENTER |
| EFFECT |
|
|
|
|
|
| SHIFT | SLEEP | DIALOG E | |
D.ACCESS |
|
| CLASS | /CHSEL | |||
TOP MENU |
|
| MENU |
|
|
|
|
| TUNE |
|
|
|
|
|
|
DTVMENU | ST | ST |
|
|
|
|
|
T.EDIT | ENTER | BAND |
|
|
|
| |
|
|
| RECEIVER |
| |||
SYSTEM TUNE |
|
|
|
| |||
|
|
|
|
|
| ||
GUIDE SETUP |
| RETURN |
|
|
|
|
6To program additional signals for the current component repeat steps 4 and 5. To program signals for another component, exit and repeat steps 1 through 5.
7Press the RECEIVER button to exit and store the operation(s).
Erasing one of the remote control button settings
This erases one of the buttons you have programmed and restores the button to the factory default.
1While pressing the RECEIVER button, press and hold the 1 button.
The remote LCD display shows SETUP.
2Press the MULTI CONTROL button corresponding to the button setting to be erased.
The LCD on the remote displays the component.
66
3 Use (cursor left/right) to select ERASE then press ENTER.
The LCD display flashes PRES KEY.
4Press and hold the button to be erased for two seconds.
The LCD display shows OK or NO CODE to confirm the button has been erased.
5Repeat step 4 to erase other buttons.
6Press the RECEIVER button when you’re done.
Erasing all of the remote control presets
This will erase all preset remote control preset codes and
1While pressing the RECEIVER button, press and hold the 1 button.
The remote LCD display shows SETUP.
2Press the DVD/LD MULTI CONTROL button.
3 Use (cursor left/right) to select RESET then press and hold ENTER for about two seconds.
The LCD shows OK to confirm the remote presets have been erased.
Direct function
• Default setting: ON
You can use the direct function feature to control one component using the remote control while at the same time, using your receiver to playback a different component.
This could let you, for example, use the remote control to set up and listen to a CD on the receiver and then use the remote control to rewind a tape in your VCR while you continue to listen to your CD player.
En