04Connecting up
•To achieve the best possible surround sound, install your speakers as shown below. Be sure all speakers are installed securely to prevent accidents and improve sound quality.
The diagrams below show suggested surround and surround back speaker orientation. The first diagram (fig. A) shows orientation with one surround back speaker (or none) connected. The second (fig. B) shows orientation with two surround back speakers connected.
Caution
• If you choose to install the center speaker |
on top of the TV, be sure to secure it with |
putty, or by other suitable means, to reduce |
the risk of damage or injury resulting from |
the speaker falling from the TV in the event |
of external shocks such as earthquakes. |
• Make sure no exposed speaker wire is |
touching the rear panel, this may cause the |
receiver to turn off automatically. |
90~120
LS
LS
SB
fig. A
RS | LS | RS |
|
| 0~60 |
RS |
|
|
| SBL | SBL SBR SBR |
fig. B
Overhead view of speaker setup
You can also refer to the
Front |
| Front |
|
left | Center | right |
|
|
| Subwoofer |
|
Surround |
| Surround |
|
left |
| right |
|
Listening position |
| ||
Surround back left |
| Surround back right |
|
Single surround back speaker | . | ||
|
|
|
3-D view of 7.1 channel speaker setup
24
En