05Controls and displays
Display
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |
| [ L ] | 6 |
| [ C ] |
|
SP | AB [ R ] |
|
| [Rs] | 0 |
| [SBR] |
[SBL ] [Ls]
6
40 125 250 4K13K
12 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 |
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal:
AUTO
Lights when AUTO signal select is on.
SB
Depending on the source, this lights when a signal with surround back channel encoding is detected.
DIGITAL
Lights when a digital audio signal is detected.
2DIGITAL
Lights when a Dolby Digital encoded signal is detected.
ANALOG
Lights when an analog signal is detected.
DTS
4 2 PRO LOGIC IIx
When the (STANDARD) Pro Logic II mode of the receiver is on, 2 PRO LOGIC II lights to indicate Pro Logic II decoding. 2 PRO LOGIC IIx lights to indicate Pro Logic IIx decoding (see Listening in surround sound on page 36).
5 VIR.SB
Lights during Virtual surround back processing (page 42).
6 DIRECT
Lights when source direct playback is in use. Direct playback bypasses the tone controls and channel levels for the most accurate reproduction of a source.
7 AUTO SURR.
Lights when the Auto Surround feature is switched on (see Auto playback on page 36).
8 ATT
Lights when a source with DTS encoded audio signals is detected.
2
When the STANDARD mode is on, this lights to indicate decoding of a DTS multichannel signal.
3 2 DIGITAL
When the STANDARD mode of the receiver is on, this lights to indicate decoding of a Dolby Digital multichannel signal.
Lights when INPUT ATT is used to attenuate (reduce) the level of the analog input signal.
9 SLEEP
Lights when the sleep mode is active (page 45).
10Tuner indicators
Lights when the mono mode is set using the MPX button.
Lights when a stereo FM broadcast is being received in auto stereo mode.
28
En