HP 4250/4350 manual Tray N Size Letter Legal, Tray N Custom, Unit of Measure, Dimension

Models: 4250/4350

1 304
Download 304 pages 41.53 Kb
Page 224
Image 224

Item

Values

TRAY [N] SIZE

*LETTER

 

LEGAL

 

A4

Tray [N] Custom

UNIT OF MEASURE

 

X DIMENSION

 

Y DIMENSION

Explanation

Use this item to set the value to correspond with the media size that is currently loaded in the specified tray, where [N] is the number of the tray.

This item appears only if an optional tray is installed. The available sizes might vary depending upon the optional feeder device that is installed.

This item appears only if a tray is set to a custom size.

UNIT OF MEASURE: Use this option to select the unit of measure to use when you set custom paper sizes for the specified tray.

XDIMENSION: Use this item to set the measurement of the width of the paper (measurement from side to side in the tray). The options are 3.0 to 8.50 INCHES or 76 to 216 MM.

YDIMENSION: Sets the measurement of the length of the paper (measurement from front to back in the tray). The options are 5.0 to 14.00 INCHES or 127 to 356 MM.

After the Y DIMENSION value is selected, a summary screen appears. This screen contains feedback that summarizes all the information that was specified on the previous three screens, such as TRAY 1

SIZE= 8.50 x 14 INCHES, Setting saved.

212 Appendix B Control panel menus

ENWW

Page 224
Image 224
HP 4250/4350 Tray N Size Letter Legal, Tray N Custom, Unit of Measure, Dimension, SIZE= 8.50 x 14 INCHES, Setting saved