Spring Switzerland GmbH Ver. 1.61 manual Hardware Function UPS configuration

28

•option: -p is a port for Remote Access.

•option: -l is a user (In our product the user must be "cli").

•option: address_ip is a address of server you want to connect to.

You will be ask for a password you entered on server for Remote Access. To connect to server from Microsoft Windows, download free ssh client Putty (www.putty.nl).

•In Host Name (or IP address) field please enter IP address of the server

•In Port field please enter the same port as in the server GUI (default 22222)

•In Protocol please choose SSH

•In Category: Connection -> Data -> Auto-login-username please enter: "cli"

•In Terminal -> Keyboard -> The Function Keys and keypad please select "VT100+"

•Go back to Category Session, enter session name in field Saved Sessions and click on "Save" button.

•Then click on new saved session, click "Open" and enter the "password". (In case you did not enter Auto-login-username, it will prompt for username, so please enter: "cli")

5.2.1.4 Hardware

Function: “UPS configuration”

In the function you can select a UPS device desired (Uninterrupted Power Supply). For the connection of the UPS device to the Open-E iSCSI, the USB port is most frequently used.

In the settings you can select the UPS model, cable type, connection port and the length of the time out. The time-out defines the time between a power failure and the moment the system will shut down. UPS support in mode “Single”