30
Function “Set time”
With this function, date and time can be entered manually. Alternatively, take the route via an NTP server, which has to be defined in the previous function.
Function “Power button settings”
In this section you specify which action will be performed in case of power button is pressed Options:
•no action (none option),
•restart computer (reboot option),
•power off computer (halt option).
Function “Motherboard info”
With this function you can check info about your motherboard.
5.2.1.5 Target Manager
Function “Unit Manager”
After clicking on the branch “volumes” in the left part of page you will find a list of all available units with entire disk size. In order to integrate available units into the volume group, just use the “add” button, after which the unit will combined into one volume group.
