34
To create a target assign a name or leave the "Target Default Name" option
checked. Target name can contain alphanumeric characters: ' . ' ' : ' - '
A target name is considered case-insensitive. Every character entered will be
converted to low-case. No spaces and no underscores are permitted.
The server name will be used as a part of the default target name
In this function you can create new targets, which will be seen in client stations
as logical disks. You can change the name of any target.
After creating new target (see below) there will be created a new branch:
“target0”
Add CHAP users that are granted to access to this target.
You can use following keyboard keys in the lists (first set focus to
desired list):
o Home: jump to the first
o End: jump to the last
o Shift + arrow key: for multi-select
o letter key: jump to the first position starting with pressed key
If you enable CHAP user access authentication but will not select any users to
have access, then nobody will have access to the Target.
Additionally you can set password required to establish connection of iSCSI
Initiator to iSCSI Target Server.
To do this please use the function iSCSI Access Password situated in setup ->
target manager -> targets.
The Microsoft iSCSI software initiator requires using password from 12
to 16 alphanumerical characters.