Axis Communications AXIS 5550, Network Print Servers, AXIS 5500 manual Management and Configuration

Management and Configuration

Admin When in Admin mode, you have access to all the print server's parameters and you can change them to your liking. This mode is intended for network administrators and can be password protected to prevent unauthorized changing of the print server parameters.

Note:

To protect the Admin pages from unauthorized use, it is highly recommended that you change the default password.

This is done from the Admin General Settings General tab. Enter the password in the Root Password field.

Accessing the Web Follow the steps below to access the internal Web pages of the Axis Pages Network Print Server:

1.Enter the print server’s IP address (or host name) in the Location/Address field of your Web browser. Press Enter

2.The Printer Overview page will appear. Click Admin to access the Administration Web pages.

Note:

•You can address the print server’s Web interface via https:// To do this you must enable the SSL/TLS protocols in the Web interface: Admin Network Settings Detailed View TCP/IP Network and set the HTTPS Enabled parameter to Yes (you must have a valid certificate loaded). If you do not have a valid certificate loaded, select Admin Security Settings and click Create.

3.If you have changed the User/Password combination, you will be prompted for them. Click OK.

AXIS 5500 / AXIS 5550 User’s Manual 89