Axis Communications Network Print Servers, AXIS 5500, AXIS 5550 192.168.3.191, ATYPE1 EPSONLQ2

Adding Printers in Macintosh

Example: The following example describes how you set the print server parameters in AppleTalk.

Important:

DO NOT use the parameter values from this example when configuring your print server. You should select values that are appropriate for your printers and network settings.

1.Open the Chooser from the Apple menu.

2.Select a network printer driver — any LaserWriter will do.

3.Select the printer port ending with _CFG.

4.Close the Chooser.

5.Open a text editor, e.g. SimpleText.

6.Write a text file containing the parameters you want to set:

BINARY_TYPE_1.	:BCP
INT_ADDR.	:192.168.3.191
ATYPE_1.	:EPSONLQ2

Note:

Parameters that you do not want to set should be excluded from the text file. Refer to the Parameter list in this manual for information about which values that are valid for each parameter.

7.Print the text file. The settings will be stored in the print server.

8.Open the Chooser and select the printer port you wish to use for printing documents.

9.Close the Chooser.

Note:

The _CFG port disappears 60 minutes after the AXIS 5500/AXIS 5550 has been powered on. If you want it to reappear, you must restart your print server.

AXIS 5500 / AXIS 5550 User’s Manual 45