Axis Communications AXIS 5500, AXIS 5550 manual TCP/IP Network protocol, IPX Network protocol

Adding Printers in NetWare

9.You will find the print server in the next window with the printer attached on the connected port. Depending on the transport protocol you used when you start the installation, the print server should appear as following:

•TCP/IP Network protocol:

IP Address and Port, e.g: 192.168.70.243 and LPT1

Only the ports with a connected printer show up in this window. If the printer is not in the displayed print list, click Manually specify the print server and do the following: Enter the print server’s IP address in the IP Address field and choose a port in the Print Server Port field:

e.g., 192.168.70.243 and LPT1

The port numbers are USB1 or LPT1; “other/unknown” denotes the

USB1 port.

Ports available	USB port	Parallel port
AXIS 5500	other/unknown	—
AXIS 5550	other/unknown	parallel

IPX Network protocol:

All the available ports will be presented, regardless if the printers are or not connected to those ports, e.g.

AXIS5FF66A_P1 corresponds to the LPT1 port, and AXIS5FF66A_P2 corresponds to the USB1 port.

The IPX Addresses for the above printers will appear as:

AXIS 5500 / AXIS 5550 User’s Manual 49