Axis Communications Network Print Servers Using Windows XP as an example, Click Configure Port

The Parameter List

Enable SNMP Status SNMP Status is enabled through Windows’ printer port settings.

Example You have a three port print server and want to enable SNMP Status for LPT2. The table above tells you to set the SNMP Device Index to 3.

Using Windows XP as an example:

1.Go to Start Printers and Faxes.

2.Select Printer and then Properties.

3.Select Port and mark the Port you would like to change.

4.Click Configure Port...

5.Ensure that SNMP Status Enabled is ticked and enter the correct index number in SNMP Device Index, taken from the table above (3 in this example).

6.Click OK and Close.

AXIS 5500 / AXIS 5550 User’s Manual 159