Configuration Possibilities
Section 11 Configuration Possibilities
This section describes some special features offered by the AXIS 5500/AXIS 5550:
Autodetect Printer Type, on page 101
Auto-IP, on page 101
Changing Language in the Print Server’s Web Interface, on page 119
Enabling Secure Web Services — SSL/TLS, on page 121
Flashloading New Firmware into the Print Server, on page 119
IPP (Internet Printing Protocol), on page 102
Logical Printers for Customized Printing, on page 111
Network Speed, on page 118
NetWare Packet Signature Levels, on page 118
Overriding Port Status, on page 123
TCP/IP Restrictions, on page 120
Autodetect Printer Type
The print server can automatically detect the type of printer you are using if you enable Autodetect Printer Type. The print server can then recognize Epson and Hewlett Packard InkJet printers. Most Epson and Hewlett Packard InkJet printers that have Mac OS printer drivers for network printing are supported. If Autodetect Printer Type is disabled, the AppleTalk printer type has to be specified manually in the print server. For Epson InkJets it would be "EPSONLQ2" and for HP InkJets it would be "DeskWriter". If the print server does not recognize the connected printer the default setting, "LaserWriter" will be used as printer type. "LaserWriter" is the recommended setting to be used with all PostScript printers.
To enable Autodetect Printer Type, log in to your print server’s Web interface and select Admin Network Settings Detailed View Macintosh Auto Detect Printer Type Yes.
See the Help pages in the print server’s Web interface for details.
Auto-IP
In the absence of an IP address management mechanism such as DHCP, the print server will receive a temporary IP address automatically over
AXIS 5500 / AXIS 5550 User’s Manual | 101 |
