Axis Communications AXIS 5550, Network Print Servers, AXIS 5500 manual US1

Adding Printers in Windows

Adding Printers over NetBIOS/NetBEUI in Windows NT using AXIS Print Monitor

See to it that the NetBEUI protocol is installed on your client. Follow the procedure below to install Axis Printer Ports from a Windows NT workstation:

1.Install AXIS Print Monitor on all workstations that will print via the print server.

2.To start the Add Printer Wizard, select Settings Printers from the Start menu and double-click the Add Printer icon.

3.The Wizard asks you to select My Computer or Network printer server. Select My Computer. Click Next.

4.Click Add Port... In the Available Ports dialog, select AXIS Port and click New Port...

5.Select NetBIOS/NetBEUI as your choice of network protocol and click OK.

6.Select the AXIS Port you want to add from the list of available ports. The

port appears as <name>.<port> (Example: AX100086.LP1). The <port> is taken from the table below. Click OK. Close the Printer Ports window.

Ports available	USB port	Parallel port
AXIS 5500	US1	—
AXIS 5550	US1	LP1

7.Click the Configure Port... button. Choose whether error condition pop-up messages are to be displayed by checking the box in the Configure Axis Ports

dialog. Define the frequency at which the error messages should be displayed after retry. Click OK. Continue the installation by clicking Next.

8.Choose the appropriate printer driver for your printer. Click Next and proceed directly to step 12. It is only necessary to perform steps 10-11 if your printer does not appear in the list.

Note:

Even if the desired printer is available in the Manufacturers and Printers lists, you are advised to use the printer driver provided with the printer. This assures you of the latest driver software.

9.Click the Have Disk... button. Insert the printer driver diskette/CD that was

provided with your printer, select the appropriate diskette/CD drive and click OK.

10.Select the printer driver you want to install and click Next.

11.Enter an appropriate name for your printer and click Next.

12.Choose whether you want to share the printer with other network users and click Next.

13.Choose whether you want to print a test page and then click Finish.

AXIS 5500 / AXIS 5550 User’s Manual 35