Axis Communications AXIS 5550, AXIS 5500 manual Flashloading New Firmware into the Print Server

Configuration Possibilities

Print Server Levels Print server signature levels are assigned by a new NET.CFG parameter SIGNATURE LEVEL = n

Key to Print Server Levels	Explanation
0	Print server does not sign packets
1 (default)	Print server signs packets only if the server requests it (server
	option is 2 or higher)
2	Print server signs packets if the server is capable of signing
	(server option is 1 or higher)
3	Print server signs packets and requires the server to sign
	packets (or logging in will fail)

Regardless of server level, the AXIS print server has the capability to log in in Print Server Mode since it supports NCP Packet Level 3 (which is the most restrictive).

These procedures are taken care of automatically. There are no configurable parameters in the Print Server for choosing the NCP Packet Signature Level. The AXIS print server adapts itself to the Server Level.

Flashloading New Firmware into the Print Server

The firmware can easily be upgraded, since flash loading is possible from the print server’s internal Web pages. Client software is not needed to upgrade the firmware. See Upgrading from the Print Server’s Internal Web Pages, on page 85.

Changing Language in the Print Server’s Web Interface

English, French, German, Italian, Japanese and Spanish is supported in the print server's Web interface, with English as the default language. You can change the language used for the print server’s Web interface from the User mode:

1.Click the Change button next to ‘Language’.

2.Choose your preferred language and character set from the drop-down lists, click OK and then press F5 to refresh the view.

You can change the Character Set by clicking the Change button. The default Character Set is ISO-8859-1, which can be applied in most cases. Japanese requires SHIFT_JIS.

AXIS 5500 / AXIS 5550 User’s Manual 119