Axis Communications AXIS 5500, Network Print Servers, AXIS 5550

Adding Printers in Windows

2.Choose whether error condition pop-up messages are to be displayed by checking the box in the Configure AXIS Ports dialog. Define the frequency at which the error messages should be displayed after retry. Click OK.

Note:

Even if the desired printer is available in the Manufacturers and Printers lists, you are advised to use the print driver provided with the printer. This assures you of the latest driver software.

Adding Printers in Windows 98 and Me over NetBIOS/NetBEUI using AXIS Print Monitor

Follow the procedures below to install Axis NetBIOS/NetBEUI printer ports on a Windows 98 workstation, using AXIS Print Monitor:

1.To start the Add Printer Wizard, select Settings Printers from the Start menu and double-click the Add Printer icon.

2.After clicking Next in the first dialog, the Wizard asks you to select Local printer or Network printer. Select Local printer. Click Next.

3.Choose the appropriate printer driver for your printer. If the desired printer driver appears in the displayed Manufacturers and Printers lists, highlight your selection, click Next and proceed directly to step 6. It is only necessary to perform steps 4 - 5 if your printer does not appear in the model list.

Note:

Even if the desired printer is available in the Manufacturers and Printers lists, you are advised to use the printer driver provided with the printer. This assures you of the latest driver software.

4.Click the Have Disk... button. Insert the printer driver diskette/CD that was

provided with your printer, select the appropriate diskette/CD drive and click OK.

5.Select the printer driver you want to install and click Next.

6.Select the AXIS Printer Port from the Available Ports list. The port names appears as <name>.<port>. Here, <name> is AX followed by the last six digits of the print server’s serial number (e.g. AX100086) and <port> is taken from the table below. Click the Configure Port button.

Port number	USB port	Parallel port
AXIS 5500	US1	—
AXIS 5550	US1	LP1

Example: AX100086.US1

AXIS 5500 / AXIS 5550 User’s Manual

37

Image 37

Axis Communications AXIS 5500, Network Print Servers, AXIS 5550 manual Port number USB port Parallel port Axis

Contents

Axis 5500 / Axis 5550 User’s Manual Axis 5500/AXIS Network Print Servers Regulatory Information Table of Contents 101 NetWare Parameter Combinations Section Introduction Support ServicesAbout this Manual About Axis Network Printing Windows Supported Environments Product Overview Package ContentsAxis 5500 & Axis Axis Network Product CD Axis Physical Description Mounting the Axis 5500/AXIS Features and Benefits Product Overview Connecting the Hardware Axis Basic InstallationQuick Overview Follow these steps to make your printer network ready Backside label on print server Test page you print by pressing the test button once Assigning an IP Address to the Print ServerAddress of the print server manually Manual IP Address Set the IP Address with Dhcp Example Using Rarp UNIX/Linux Example Open a Command Prompt and enter the following commands Using ARP Windows 98/NT Me/2000/XPUsing ARP UNIX/Linux and Mac Open a Terminal and enter the following commands TCP/IP Making Network Printers available for printing on your PC Environment Method Description Client Software Windows Adding Printers in Windows Installation method according to your computer environment Adding Printers in Windows Wizard searches for a suitable printer driver Windows XP/Server Interface pagesWindows Axis 5500 / Axis 5550 User’s Manual Click Next and Finish Select Protocols Add TCP\IP Protocol Select ServicesAdd Microsoft TCP\IP Printing List, click Add Port Printer Click NextPorts available USB port Parallel port Axis Click Next and Finish Basic SetupClose Add/Remove Programs and the Control Panel Add Printer Wizard. Click Next Go to Start Settings Printers Axis Print Monitor Software US1 US1 Adding Printers in Windows Example AX100086.US1 Axis 5500 / Axis 5550 User’s Manual Port number USB port Parallel port Axis Adding Printers in Windows Bonjour Printing in Mac OS Adding Printers in Macintosh = Bonjour Service Name Installation of LPR printing in MAC OS Installation in Mac OS X using AppleTalkIf you want to print using LPR, select From the Printer List dialog, select AppleTalk Choosing a Printer Installation on Mac OS 9.1 or older, using AppleTalk Click the LaserWriter 8.0 icon Adding Printers in Macintosh ATYPE1 EPSONLQ2 192.168.3.191 IPX/SPX Adding Printers in NetWare Setup using Ndps Click OK Type a name of your choice in the Ndps Printer Agent field IPX Network protocol TCP/IP Network protocol Adding Printers in NetWare Controlled Access Printers AXIS5FF66AIPX1 Adding Printers in NetWare TCP/IP Network protocol Example 01d7e1c200408c5ff6a6400c, where D7e1c200408c5ff6a6 and LPT1 If the printer is not in the displayed print list On the any workstation, browse to WorkstationNW 5.1 File Server\SYSPUBLIC\Win32 Start Nwpmw32.exe Novell Printer Manager Click Add. a list of available printers appears Axis 5500 / Axis 5550 User’s Manual Select Network printer and click Next Installing Axis IPP Gateway Configuration Snap For NetWare Setup using iPrint Type TOMCAT33 Enter Type Nvxadmup Enter Type Nsweb Enter Click on Create Printer Click on iPrint Management on the left pane Http//IP address of your NW server631/IPP Choose the with Installation Wizard option Basic Setup with Axis NetPilot AXIS1A0003USB1Q Advanced Installation using Axis NetPilot Button Basic Queue-based printing over IP Installing Axis Network Print Server Web browser for Print Server Management on Have just captured Notification Printer StatusPrint Layout Print Tools Adding Printers in UNIX/LinuxSpooling Click the Add a new printer button Typical Invocation via a Windows Manager Also see TCP Ports Opened for Raw Printing on Typical Invocation from a Terminal Window Invocation Print Queues Debian Red Hat Select Unix Printer from the Queue Type menu, and click Next Main printconf window SuSE Axis axinstall Script Uses industry standard network software on the host Print Methods on TCP/IP Networks Limitations Adding Printers in OS/2 NetBIOS/NetBEUI Printing in OS/2TCP/IP Printing US1 Creating Open LAN Server AdministrationPrint Queue Down Upgrading the Firmware Updating the FirmwareWeb Pages TCP/IP Network Change to binary mode transfer Example using print server IP addressObtaining the Software Type bin hash or binary hash and press Enter Using a Web browser for Print Server Management Management and Configuration Management and Configuration Management and Configuration Management and Configuration Using Axis ThinWizard for Print Server Management Axis ThinWizard interface appears Using FTP for Print Server Management Example Put config Config Using Telnet Typical Telnet session to view the Account File Using Snmp Using Novell Utilities 100 Autodetect Printer Type Configuration PossibilitiesAuto-IP Auto-IP, on IPP Internet Printing Protocol Mail Notification Requirements IPP Printing IPP Windows NT Computer Open Start Settings PrintersChoose Add Printer. The Add Printer Wizard will start Axis 5500 / Axis 5550 User’s Manual 105 HP Internet Printer Connection will start. Click Next Available Ports window, click Add Port Next 108 Configuration Possibilities 110 Logical Printers for Customized Printing Select the PR1 tab Set the parameter Physical Port to USB1 PrintersSet the parameter Character Set Conversion to Isoibm Set the parameter Character Set Conversion to Decibm Axis 5500 / Axis 5550 User’s Manual 113 Select the PR4 tab Select the PR1 Web Axis 5500 / Axis 5550 User’s Manual 115 Set the Printer Language Translation parameter to Postscr Set the Physical Port parameter to LPT1 Click the OK button Select Admin Logical Printers and the PR3 tab Axis 5500 / Axis 5550 User’s Manual 117 NetWare Packet Signature Levels Network Speed Changing Language in the Print Server’s Web Interface Flashloading New Firmware into the Print Server TCP/IP Restrictions Certificates Enabling Secure Web Services SSL/TLS Over https Importing a Certificate Axis 5500 / Axis 5550 User’s Manual 123 Overriding Port Status Click the Create initial user button Enabling the SNMPv3 Protocol Type One Section Obtaining an IP Address and Subnet Mask Type Two Axis 5500 / Axis 5550 User’s Manual 127 128 Test Button LED Indicators TroubleshootingWeb Interface Replies Established 132 Supported Protocols NetBIOS/NetBEUI Technical SpecificationSupported Systems Printer Connection Hardware DimensionsApprovals 136 Axis 5500 / Axis 5550 User’s Manual 137 Parameter List ISO-8859-1 SHIFTJIS, ISO-8859-1, UTF-8 ROOTPWD. passJapanese LLC Menu DNSADDR1 0 0 DNSADDR2 0 0 WINSADDR1 0 0 WINSADDR2 0 0DEFIPFRAMETYPE. EthernetII EthernetII, Snap NetWare Menu NETWENB. YES SNMPv3 MenuFR8023. YES FR8022. YES Parameter List PR6 PR5PR7 PR8 Printer2 Menu PR2NAME 66 0 100 60 30PR2STR Printer3 Menu PR3NAME PR4STR Printer4 Menu PR4NAMEPrinter5 Menu PR5NAME PR5STR 0A 02 0D 0A Printer7 Menu PR7NAME 01 0A 02 0D 0APR7STR 0A 02 0D 0A Printer8 Menu PR8NAME U1READT USB1 MenuEmail Menu Axis 5500 / Axis 5550 User’s Manual 147 TCP/IP Printing Menu EthernetII, SnapPROSPWD. netprinter Prosprt 9100-9101, Closed Axis 5500 / Axis 5550 User’s Manual 149 LPRINT2. AX60F4A1.US1 PR1PR2 150 PR4 PR3Axis 5500 / Axis 5550 User’s Manual 151 PR1 PR1, PR2, PR3, PR4, PR5, PR6, PR7, PR8 LPT1Printer2 Menu USB1 PR3 PR1, PR2, PR3, PR4, PR5, PR6, PR7, PR8 Printer3 MenuPrinter4 Menu PR4 PR1, PR2, PR3, PR4, PR5, PR6, PR7, PR8 PR5 PR1, PR2, PR3, PR4, PR5, PR6, PR7, PR8 Printer5 MenuPrinter6 Menu PR6 PR1, PR2, PR3, PR4, PR5, PR6, PR7, PR8 PR7 PR1, PR2, PR3, PR4, PR5, PR6, PR7, PR8 Printer7 MenuPrinter8 Menu PR8 PR1, PR2, PR3, PR4, PR5, PR6, PR7, PR8 L1BSYTM LPT1 Menu NetWare Parameter Combinations Snmp Device Index TCP Ports Opened for Raw Printing Click Configure Port Using Windows XP as an exampleSelect Port and mark the Port you would like to change Glossary Glossary Glossary Glossary 164 Axis 5500 / Axis 5550 User’s Manual 165 Index Configuration methods Axis 5500 / Axis 5550 User’s Manual 167 Http Https Print Problems PowerNetWare printing modes Network Printing Setting upProtocols Axis 5500 / Axis 5550 User’s Manual 169 User View Certificate