Barco DCS-200 manual bíÜÉêåÉí, Operation, 41. Ethernet Menu sample

4. Operation

Using the Setup Menu

• Default: 10

Note

bíÜÉêåÉí

It is recommend that you use a low intensity setting to avoid "burn-in" of the display.

From the System Menu, select Ethernet to display the Ethernet Menu:

ETHERNET
> DHCP		OFF
Config Network		>>
IP	192.168.000.010
M	00:04:a5:19:10:52

Figure 4-41.Ethernet Menu (sample)

The following Ethernet functions are available:

•DHCP — DHCP can be turned OFF or ON.

~When OFF, the Config Network field appears, which enables you to manually enter a static IP address, Subnet mask and Gateway.

Note

Always consult with your network administrator to obtain valid IP, subnet mask and gateway addresses.

~When ON, the DCS-200 queries the DHCP server for a valid IP address, and the Config Network field is hidden.

•If the DCS-200 finds a DHCP server and receives an IP address, the address is displayed.

•If a server is not found, an IP address is not assigned.

•Config Network — select this function to display the Config Network Menu, which enables you to choose the specific Ethernet address you wish to change.

CONFIG NETWORK
> Set Static IP	>>
Set Netmask	>>
Set Gateway	>>
Figure 4-42.Config Network Menu (sample)

74 DCS-200 • User’s Guide