Barco DCS-200 manual aáëéä~ó=pÉÅíáçå, Hardware Orientation, Program, Next, 1024x768 @59.94, Ntsc

SEL

2. Hardware Orientation

DCS-200 Front Panel

aáëéä~ó=pÉÅíáçå

The figure below illustrates the Display Section:

PROGRAM:	RGB		SEL
NEXT:	1024x768 @59.94
	SDI
	NTSC (480i)	Adjust	ESC

Figure 2-2.Display Section with sample Status Menu

Descriptions of each button and control are provided below:

•The Menu Display is a 4-line x 20-character Vacuum Fluorescent Display (VFD) that shows all DCS-200 menus and sub-menus. Brightness is adjustable. The following illustration shows a typical DCS-200 menu.

SETUP MENU
> Trans Time	1.0
Output	>>
Preview	>>

Figure 2-3.Sample Setup Menu Display

For all setup menus, please note:

~The top line names the current menu, in all capital letters.

~The navigation cursor (>) in the left-hand column indicates the current line on which action can be taken.

~The double arrow (>>) indicates that a sub-menu is available.

Note	The Status Menu layout is different from the “setup” menu
	display. In Chapter 4, refer to the “Status Menu” section on
	page 44 for details.

In Chapter 4, refer to the “Menu Tree” section on page 38 for additional details on the system’s menu tree.

•ADJUST — use the Adjust Knob to scroll through all system menus.

~Turn the knob counter-clockwise (CCW) to scroll down.

~Turn the knob clockwise (CW) to scroll up.

•SEL — press to enter the setup menu tree (from the Status Menu), to enter a sub-menu, change a parameter, accept a parameter, or to answer “Yes” to certain menu queries.

DCS-200 • User’s Guide 21