Barco DCS-200 manual `çååÉÅíáîáíó=aá~Öê~ã, ÉéäáÅ~íáçå=nìÉëíáçåë

NK==fåíêçÇìÅíáçå

Connectivity Diagram

`çååÉÅíáîáíó=aá~Öê~ã

The figure below illustrates a basic DCS-200 system.

Sample Source Input

Devices

Inputs 1 - 6 (Analog) DCS-200

Inputs 7 - 8 (DVI)

Input 9 (HD/SD SDI)

Preview

Program

Ethernet Serial

Figure 1-1.Block diagram, DCS-200 system

In the diagram:

•Up to nine sources can be connected to the DCS-200:

~6 x analog inputs (on HD-15 connectors), for a variety of YUV and RGBHV sources, including CVBS and Y/C.

~2 x DVI inputs, for computer sources. These two DVI connectors also support analog RGB inputs, and these inputs are universal, and accept all types of sources — just like the six HD-15 connectors. (To connect analog sources, use a customer-supplied DVI to HD-15adapter.)

~1 x SD-SDI or HD-SDI input.

•

•

The DCS-200 connects to a Preview monitor via analog or DVI.

The DCS-200 connects to a projector (or other target device) via analog or DVI.

In Chapter 2, refer to the “Inputs Section” heading on page 22 for details on all inputs.

^ééäáÅ~íáçå=nìÉëíáçåë

At Barco, we take pride in offering unique solutions to demanding technical problems. If you have application questions, require further information or would like to discuss your application requirements in more detail, please call (866) 469-8036. Our Customer Support Engineers will be happy to supply you with the support you need. Refer to Appendix C, “Contact Information” on page 159 for details.

18 DCS-200 • User’s Guide