Barco DCS-200 manual Fpbi, Fpif`b=, Fpjm=, List Response 0RGB, Query Format Isel -?

_K==oÉãçíÉ=`çåíêçä

Remote Commands

•

•

•

•

Parameters:

-i (input): 1 - 9

-s (saturation): 0 - 150 (Default: 100) Query Format: ISAT -i (input) -?

Query Response: ISAT -i (input) -s (sat) --min 75 --max 125

List Response: 0:"RGB"

1:"SMPTE"

fpbi

•

•

•

Description: Selects the specified input as the current input to display. This command will perform the valid sync check, route the input, recall video if saved or acquire source if not saved. Includes the -f (file) parameter option. Also, the IMAP will be updated for the input if the file parameter is specified.

Command Format: ISEL -i (input) -f (file

Parameters: -i (input): 1 - 9

•

•

-f (file): 1 - 64; If specified, updates the File Association menu to reflect the selected file number. If not specified, uses the file number specified in the ICREC query.

Query Format: ISEL -?

Query Response: ISEL -i (input)

fpif`b=

•Description: Input Sync Slice Threshold Adjust. This command is only valid for analog inputs.

•

•

Command Format: ISLICE -i (input) -t (threshold)

Parameters: -i (input): 1 - 8 for adjustments (7 & 8 only if itype is analog) -t(threshold): 8 - 256mV; +8 increments (default: 128mV)

•

•

fpjm=

•

Query Format: ISLICE -i (input) -?

Query Response: ISLICE -i (input) -t (threshold) --min 8 -- max 256

Description: Adjust Input Sample mode. This command is only adjustable for analog input types. Other input types will provide query information only.

•

•

•

•

Command Format: ISMP -i (input) -s (sample mode)

Parameters:

-i (input): 1 - 8 for adjustments (7 & 8 only if itype is analog); 1 - 9 for query

-s (sample mode): 0 - over sample, 1 - 1:1 sampling (Default: 1:1) Query Format: ISMP -i (input) -?

Query Response: ISMP -i (input) -s (sample mode) --min 0 -- max 1

144 DCS-200 • User’s Guide