Barco DCS-200 manual hÉó=pÉíìé=jÉåì, Operation, 36. Example of a Key, 37. Key Setup Menu sample

4. Operation

Using the Setup Menu

After you select a file number and choose Recall File, press SEL to initiate the recall or ESC to continue using the current configuration.

When you press SEL, if the input timing matches the timing in the recalled input configuration file, the input uses the recalled configuration file immediately. The File Association Menu is also updated to reflect your change.

If the input and configuration file timings do not match and In Auto Acquire is ON, an “auto acquire” will be performed. For more information about this function, refer to the “Understanding Auto Acquire” section on page 86.

hÉó=pÉíìé=jÉåì

A luminance key is a video effect in which one video source cuts into a background image. The "key source" is essentially an electronic hole which is cut into a background image, as shown in the following illustration. In this illustration, DCS-200is the key, which cuts into the background image.

Figure 4-36.Example of a Key

In the DCS-200, the key hole is filled with video from one of the two DVI digital input sources (inputs 7 and 8). You cannot use an analog input as a key source.

From the Setup Menu, select Key Setup to display the Key Setup Menu, which enables you to select a digital key source and set key parameters. If Menu Context is ON, the menu appears automatically when the KEY button is pressed.

KEY SETUP
> Input	DVI_7
Clip	0
Gain	1.00
Opacity	1023
H Offset	0
V Offset	0

Figure 4-37.Key Setup Menu (sample)

DCS-200 • User’s Guide 67