Quick Setup, Step Procedure For Details, refer to | Runco SP-50DHD

Installation

Table 3-1gives a quick overview of the PlasmaWall installation process. The sections following this one provide detailed instructions.

	Note		Installation should be performed by a qualified custom video
	Note		installation specialist.
Table 3-1. Installation Overview

Step			Procedure	For Details, refer to
Step			Procedure	page...
				page...

1		Mount the PlasmaWall on a wall or table stand		20

2		Connect the DHD Controller to the PlasmaWall		23

3		Connect signal sources to the DHD Controller		25

4		Connect external controller to DHD Controller RS-232 port		29
		(optional)

5		Apply power to the PlasmaWall		31

6		If using the PlasmaWall with a computer, adjust computer		32
		display properties

7		Display calibration: adjust the following for each input;		36 through 44
		save settings when finished:
		• Aspect ratio
		• Brightness
		• Contrast
		• Color level
		• Tint
		• Sharpness

3.2

Quick Setup

PlasmaWall SP Series Owner’s Operating Manual

19

Image 29

Runco SP-50DHD, SP-42DHD, SP-60DHD manual Quick Setup, Step Procedure For Details, refer to

Contents

SP-42DHD SP-50DHD SP-60DHD Page For Plasma Displays Three Year Limited Warranty RIGHTS, Limits and Exclusions Runco INTERNATIONAL, INC Safety Precautions Table of Contents Specifications Maintenance and TroubleshootingAppendix A. PlasmaWall Service Remote Control Operation List of Figures List of Figures About This Manual Introduction If you need Turn to Using This Manual Key Features and Benefits Description, Features and Benefits Optional Accessories PlasmaWall at a Glance Controls and IndicatorsControls and Functions PlasmaWall Model SP-42DHD Rear Panel PlasmaWall Model SP-50DHD Rear Panel PlasmaWall Model SP-60DHD Rear Panel Digital RGB Input 2 DVI-D Main Power SwitchExternal Speaker Output Right External Speaker Output Left DHD Controller Front Panel Power ButtonRunco Icon IR Sensor Left Button UP ButtonEnter Button Down Button DHD Controller Rear Panel Component Video RCA connectorsDVI OUT Inputs 3. DVI 1 / DVI 2 Digital Main AC Fuse Composite Video InputRS-232 Control Port DHD Controller Remote Control DHD Controller Remote Control Enter IR Output IndicatorLight Menu SVC CinemaISF Night ISF DAY Remote Control Installation Other surfaces Step Procedure For Details, refer to Quick Setup Considerations InstallationHigh-Altitude Operation Mounting the PlasmaWall Ventilation Ambient Light Installation Connections to the PlasmaWall and DHD Controller Connecting PlasmaWall to the DHD Controller RS-232 Connection from the DHD Controller to the PlasmaWall Components to the DHD Connecting SourceDVI Connections See Figure DVI Source DVD Player or HD Tuner with Hdmi or DVI out Digital DTV RGB Connections Digital DTV RGB Connections See Personal Computer Refer to Computer/Video Signal Compatibility on page 64 forAnalog Computer RGB Connections See Figure DVD Player, VCR Satellite Receiver Laser Disc etc Composite/S-Video/Component Video Connections See Figure Connection Connecting 12-Volt Trigger Outputs to External EquipmentRS-232 Controller 11. Installing the Cable Ties Operation Turning on the Power You must enter a passcode to access the Service menu Operation Using the On-Screen Menus Service ISF PresetsInput Source Aspect Ratio Input Source Main MenuAspect Ratio HD Pass Thru 1 HD Pass Thru Remote Aspect Ratio Control Description Key Aspect Ratio Settings Picture Brightness Contrast Color Tint Sharpness Picture Typical Gray Bar Pattern for Adjusting Contrast Gray Yellow Cyan Green Magenta Red Blue Input Position Left/Right Up/Down Width Height Overscan Input Position ISF Presets ISF Night ISF Day Custom Save Factory Default ISF PresetsInformation Serial Number Hardware Firmware 0002.034B Date Nov 25 Calibration Gain/Offset Refer to ISF Night Display Color, above Should be used by ISF-certified technicians only Service Input Names Restore Composite Video Component SD HD/RGB 1 and HD/RGB 2 Color Space Select Auto, RGB or YUV Operation Operation Cleaning Maintenance and TroubleshootingCleaning the Display Panel Body and Remote Control Cleaning the Screen Symptom Possible Causes Solution Troubleshooting Tips Computer/Video Signal Maintenance and Troubleshooting Letterbox Enter Serial Communications Value Description Min/max Stored? Power On/Off Commands CommandInput Selection Commands Aspect Ratio Commands Image Preset Commands Output Shift Commands Value Description Min/max Stored? Input Position Commands Bkgnd Enter key Command Parameter min/max Value Stored? Description PlasmaWall Specifications SpecificationsModel SP-42DHD Model SP-50DHD DHD Controller Specifications PlasmaWall Dimensions 14.8 34.3 49.1 M8 Screw Input Refresh Rate Resolution Remarks Computer/Video Signal CompatibilityHoriz KHz 56.0 45.1 Specifications Overview Figure A-1. PlasmaWall Service Remote Control Aspect Ratio RGB SetupRGB-HD DVI-D Reduction Service/Setup MenuVideo NR Noise PlasmaWall Service Remote Control Page Runco CL-810 Owner’s Operating Manual