Runco SP-42DHD, SP-60DHD, SP-50DHD specification

Operation

4.2

Selecting the Input Source

4.3

Setting the Computer Display Properties

By default, the PlasmaWall is configured to display the signal received on its RGBHV (ANALOG RGB IN) input. To use the DVI-D (DIGITAL RGB) input instead:

1. Press MENU and enter the Service Menu passcode.

You must enter a passcode to access the Service menu.

Note

2.Select Service from the Main Menu.

3.Select Display Device from the Service Menu.

4.Press to select DVI/HDMI, then press ENTER.

To maximize image quality when using the PlasmaWall with a personal computer, you may need to adjust the display properties of your computer’s video card. To do this on a Microsoft® Windows®-based PC:

1.Choose Settings from the Windows Start Menu and click on “Control Panel.”

2.Double click on the Display icon.

3.Click the Settings tab on the display dialog box.

4.Adjust the resolution to 1024x768 pixels.

32	PlasmaWall SP Series Owner’s Operating Manual

Image 42

Runco SP-42DHD, SP-60DHD, SP-50DHD manual You must enter a passcode to access the Service menu

Contents

SP-42DHD SP-50DHD SP-60DHD Page Three Year Limited Warranty For Plasma Displays RIGHTS, Limits and Exclusions Runco INTERNATIONAL, INC Safety Precautions Table of Contents Appendix A. PlasmaWall Service Remote Control Maintenance and TroubleshootingSpecifications Operation List of Figures List of Figures Introduction About This Manual Using This Manual If you need Turn to Description, Features and Benefits Key Features and Benefits Optional Accessories Controls and Indicators Controls and FunctionsPlasmaWall at a Glance PlasmaWall Model SP-42DHD Rear Panel PlasmaWall Model SP-50DHD Rear Panel PlasmaWall Model SP-60DHD Rear Panel External Speaker Output Right Main Power SwitchDigital RGB Input 2 DVI-D External Speaker Output Left Runco Icon Power ButtonDHD Controller Front Panel IR Sensor Enter Button UP ButtonLeft Button Down Button DVI OUT Component Video RCA connectorsDHD Controller Rear Panel Inputs 3. DVI 1 / DVI 2 Digital Composite Video Input RS-232 Control PortMain AC Fuse DHD Controller Remote Control DHD Controller Remote Control Light IR Output IndicatorEnter Menu ISF Night CinemaSVC ISF DAY Installation Remote Control Other surfaces Quick Setup Step Procedure For Details, refer to High-Altitude Operation InstallationConsiderations Mounting the PlasmaWall Ambient Light Ventilation Installation Connecting PlasmaWall to the DHD Controller Connections to the PlasmaWall and DHD Controller RS-232 Connection from the DHD Controller to the PlasmaWall DVI Connections See Figure Connecting SourceComponents to the DHD DVI Source DVD Player or HD Tuner with Hdmi or DVI out Digital DTV RGB Connections See Digital DTV RGB Connections Refer to Computer/Video Signal Compatibility on page 64 for Analog Computer RGB Connections See FigurePersonal Computer Composite/S-Video/Component Video Connections See Figure DVD Player, VCR Satellite Receiver Laser Disc etc Connecting 12-Volt Trigger Outputs to External Equipment RS-232 ControllerConnection 11. Installing the Cable Ties Turning on the Power Operation You must enter a passcode to access the Service menu Operation Using the On-Screen Menus Input Source ISF PresetsService Aspect Ratio Aspect Ratio Main MenuInput Source HD Pass Thru 1 HD Pass Thru Aspect Ratio Settings Remote Aspect Ratio Control Description Key Picture Picture Brightness Contrast Color Tint Sharpness Typical Gray Bar Pattern for Adjusting Contrast Gray Yellow Cyan Green Magenta Red Blue Input Position Input Position Left/Right Up/Down Width Height Overscan Information ISF PresetsISF Presets ISF Night ISF Day Custom Save Factory Default Serial Number Hardware Firmware 0002.034B Date Nov 25 Gain/Offset Refer to ISF Night Display Color, above Calibration Service Should be used by ISF-certified technicians only Input Names Restore Composite Video Component SD HD/RGB 1 and HD/RGB 2 Color Space Select Auto, RGB or YUV Operation Operation Cleaning the Display Panel Body and Remote Control Maintenance and TroubleshootingCleaning Cleaning the Screen Troubleshooting Tips Symptom Possible Causes Solution Computer/Video Signal Maintenance and Troubleshooting Serial Communications Letterbox Enter Input Selection Commands CommandValue Description Min/max Stored? Power On/Off Commands Aspect Ratio Commands Image Preset Commands Value Description Min/max Stored? Input Position Commands Output Shift Commands Bkgnd Command Parameter min/max Value Stored? Description Enter key Model SP-42DHD SpecificationsPlasmaWall Specifications Model SP-50DHD DHD Controller Specifications Dimensions PlasmaWall 14.8 34.3 49.1 M8 Screw Horiz Computer/Video Signal CompatibilityInput Refresh Rate Resolution Remarks KHz 56.0 45.1 Specifications Figure A-1. PlasmaWall Service Remote Control Overview RGB-HD RGB SetupAspect Ratio DVI-D Service/Setup Menu Video NR NoiseReduction PlasmaWall Service Remote Control Page Runco CL-810 Owner’s Operating Manual