Runco SP-60DHD, SP-42DHD, SP-50DHD manual IR Output Indicator, Enter, Light, Menu

Controls and Functions

1.IR OUTPUT INDICATOR

Lights when a button is pressed to indicate that an IR signal is being transmitted.

2.ON / OFF

Press to turn the PlasmaWall on or off.

3.ENTER

Press to select a highlighted menu item or confirm a changed setting.

4.Cursor Keys (, , , )

Use these buttons to select items or settings, adjust settings or switch display patterns.

When no menus are present on-screen, the UP and DOWN buttons toggle through the available aspect ratios, in this order:

UP Button = Anamorphic - Standard (4:3) - Letterbox - VirtualWide - Cinema DOWN Button = Cinema - VirtualWide - Letterbox - Standard (4:3) - Anamorphic

Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in this order:

LEFT Button = HD Pass Thru 2 - HD Pass Thru 1 - DVI 2 - DVI 1 - HD/RGB2 - HD/RGB 1 - Component SD - S-Video 2 - S-Video 1 - Composite

RIGHT Button = Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 - HD/RGB 2 - DVI 1 - DVI 2 - HD Pass Thru 1 - HD Pass Thru 2

5.LIGHT

Press to illuminate the buttons.

6.MENU

Press this button to access the OSD controls, or to exit the current menu and return to the previous one.

7.VIDEO (1)

Press to select Composite video input as the source or to enter the numeric character “1.”

8.COMP (Component) (2)

Press to select Component SD (480i/576i) video input as the source or to enter the numeric character “2.”

PlasmaWall SP Series Owner’s Operating Manual 15