Digital RGB Input 2 DVI-D, Main Power Switch | Runco SP-60DHD

Controls and Functions

1.COMBINATION IN/OUT Not used.

2.RS-232C (9-pin, male D-Sub)

Connect the RS-232 OUT port on the DHD Controller to this input.

3.AUDIO (OUTPUT) (3.5-mm stereo mini jack) Not used with this model.

4.AUDIO (INPUT 1) (3.5-mm stereo mini jack)

Not used with this model. Connect the audio outputs from your sources to an external audio receiver.

5.AUDIO (INPUT 2) (3.5-mm stereo mini jack)

Not used with this model. Connect the audio outputs from your sources to an external audio receiver.

6.ANALOG RGB OUT (INPUT 1) (15-pin D-Sub)

If desired, connect this output to the RGB input of a second display device.

This output is not active when the PlasmaWall is off or in standby

Note mode.

7.ANALOG RGB IN (INPUT 1) (15-pin D-Sub)

Connect the RGBHV (5xBNC) output from the DHD Controller here.

8.DIGITAL RGB (INPUT 2) (DVI-D)

HDCP-compliant digital video input. Connect the DVI output from the DHD

Controller to this input.

9.EXTERNAL SPEAKER OUTPUT (RIGHT)

Not used. Connect speakers to an external audio amplifier/receiver.

10.EXTERNAL SPEAKER OUTPUT (LEFT)

Not used. Connect speakers to an external audio amplifier/receiver.

11.POWER INPUT (100 to 240 VAC)

Connect the PlasmaWall to power here, using the included power cord.

12.MAIN POWER SWITCH

Connects or disconnects the PlasmaWall from the AC power source.

PlasmaWall SP Series Owner’s Operating Manual

9

Image 19

Runco SP-60DHD Digital RGB Input 2 DVI-D, External Speaker Output Right, External Speaker Output Left, Main Power Switch

Contents

SP-42DHD SP-50DHD SP-60DHD Page For Plasma Displays Three Year Limited Warranty RIGHTS, Limits and Exclusions Runco INTERNATIONAL, INC Safety Precautions Table of Contents Operation Maintenance and TroubleshootingSpecifications Appendix A. PlasmaWall Service Remote Control List of Figures List of Figures About This Manual Introduction If you need Turn to Using This Manual Key Features and Benefits Description, Features and Benefits Optional Accessories Controls and Functions Controls and IndicatorsPlasmaWall at a Glance PlasmaWall Model SP-42DHD Rear Panel PlasmaWall Model SP-50DHD Rear Panel PlasmaWall Model SP-60DHD Rear Panel External Speaker Output Left Main Power SwitchDigital RGB Input 2 DVI-D External Speaker Output Right IR Sensor Power ButtonDHD Controller Front Panel Runco Icon Down Button UP ButtonLeft Button Enter Button Inputs 3. DVI 1 / DVI 2 Digital Component Video RCA connectorsDHD Controller Rear Panel DVI OUT RS-232 Control Port Composite Video InputMain AC Fuse DHD Controller Remote Control DHD Controller Remote Control Menu IR Output IndicatorEnter Light ISF DAY CinemaSVC ISF Night Remote Control Installation Other surfaces Step Procedure For Details, refer to Quick Setup Mounting the PlasmaWall InstallationConsiderations High-Altitude Operation Ventilation Ambient Light Installation Connections to the PlasmaWall and DHD Controller Connecting PlasmaWall to the DHD Controller RS-232 Connection from the DHD Controller to the PlasmaWall DVI Source DVD Player or HD Tuner with Hdmi or DVI out Connecting SourceComponents to the DHD DVI Connections See Figure Digital DTV RGB Connections Digital DTV RGB Connections See Analog Computer RGB Connections See Figure Refer to Computer/Video Signal Compatibility on page 64 forPersonal Computer DVD Player, VCR Satellite Receiver Laser Disc etc Composite/S-Video/Component Video Connections See Figure RS-232 Controller Connecting 12-Volt Trigger Outputs to External EquipmentConnection 11. Installing the Cable Ties Operation Turning on the Power You must enter a passcode to access the Service menu Operation Using the On-Screen Menus Aspect Ratio ISF PresetsService Input Source HD Pass Thru 1 HD Pass Thru Main MenuInput Source Aspect Ratio Remote Aspect Ratio Control Description Key Aspect Ratio Settings Picture Brightness Contrast Color Tint Sharpness Picture Typical Gray Bar Pattern for Adjusting Contrast Gray Yellow Cyan Green Magenta Red Blue Input Position Left/Right Up/Down Width Height Overscan Input Position Serial Number Hardware Firmware 0002.034B Date Nov 25 ISF PresetsISF Presets ISF Night ISF Day Custom Save Factory Default Information Calibration Gain/Offset Refer to ISF Night Display Color, above Should be used by ISF-certified technicians only Service Input Names Restore Composite Video Component SD HD/RGB 1 and HD/RGB 2 Color Space Select Auto, RGB or YUV Operation Operation Cleaning the Screen Maintenance and TroubleshootingCleaning Cleaning the Display Panel Body and Remote Control Symptom Possible Causes Solution Troubleshooting Tips Computer/Video Signal Maintenance and Troubleshooting Letterbox Enter Serial Communications Aspect Ratio Commands CommandValue Description Min/max Stored? Power On/Off Commands Input Selection Commands Image Preset Commands Output Shift Commands Value Description Min/max Stored? Input Position Commands Bkgnd Enter key Command Parameter min/max Value Stored? Description Model SP-50DHD SpecificationsPlasmaWall Specifications Model SP-42DHD DHD Controller Specifications PlasmaWall Dimensions 14.8 34.3 49.1 M8 Screw KHz Computer/Video Signal CompatibilityInput Refresh Rate Resolution Remarks Horiz 56.0 45.1 Specifications Overview Figure A-1. PlasmaWall Service Remote Control DVI-D RGB SetupAspect Ratio RGB-HD Video NR Noise Service/Setup MenuReduction PlasmaWall Service Remote Control Page Runco CL-810 Owner’s Operating Manual