Powering On/Off the Projector

Powering On the Projector

1 . Remove the lens cap.

2 . Ensure that the power cord and signal cable are securely connected. The Power LED will turn red.

3 . Turn on the lamp by pressing “Power/Standby“ button on the control panel. The start up screen will display for 30 seconds and the Power LED will flash green. When the startup screen disappears, the Power LED will turn green.

4 . Turn on your source (computer, notebook, video player, etc.). The projector will detect your source automatically.

*If you connect multiple sources at the same time, use the Sourcebutton on the control panel to switch.

* Turn on the pro- jector first and then the signal sources.

ViewSonic PJ755D

11

Page 13
Image 13
ViewSonic PJ755D manual Powering On/Off the Projector, Powering On the Projector