Barco DCS-200 manual `çäçê=~ä~åÅÉ, Color Balance, Saturation 100 Hue Reset All

4. Operation

Using the Setup Menu

`çäçê=_~ä~åÅÉ

From the Input Menu, select Color Balance to display one of two available Color Balance Menus. The menu that appears depends on the current input’s “type.” Each menu allows you to adjust the input’s color balance parameters.

•

•

RGB Color Balance Menu Color Balance Menu

od_=`çäçê=_~ä~åÅÉ=jÉåì

If the current input’s type is set to RGB, the RGB Color Balance Menu appears:

COLOR BALANCE
> Red Contrast	0.0%
Red Bright	0.0%
Grn Contrast	0.0%
Grn Bright	0.0%
Blu Contrast	0.0%
Blu Bright	0.0%
Reset All

Figure 4-27.RGB Color Balance Menu (sample)

Each of the individual contrast and brightness settings operates in conjunction with the “global” contrast and brightness settings in the Input Menu.

•

•

•

Adjustment range (all values): -25.0% to +25.0%

Default (all values): 0.0%

Select Reset All to set all values back to their default settings.

`çäçê=_~ä~åÅÉ=jÉåì

If the current input’s type is set to Composite, S-video, YPbPr, or SDI, the Color Balance Menu appears:

COLOR BALANCE
> Saturation	100
Hue	0
Reset All

Figure 4-28.Color Balance Menu (sample)

Please note:

•Saturation is measured in percentage.

~

~

Adjustment range (Composite, S-Video): 0% to 150% (100% nominal)

Adjustment range (SDI, YPbPr): 75.0% to 125.0%

•Hue is measured in degrees, and is [N/A] for YPbPr inputs.

~Adjustment range: -90 to +90

•Select Reset All to set all values back to their default settings.

62 DCS-200 • User’s Guide