Barco DCS-200 manual PóåÅ=pÉíìé, ~ãã~, ~îÉ=lìíéìí=`çåÑáÖ, Output Sync Select

4. Operation

Using the Setup Menu

•Raster Box — This function enables or disables the raster box on the output.

~When turned ON, the system displays a one-pixel border around the active output area. Note that the raster box includes gaps that enable you to precisely align the input video to fill the output raster.

~When turned OFF, the output is clean, without the border.

póåÅ=pÉíìé

From the Output Menu, select Sync Setup to display the Output Sync Select Menu:

OUTPUT SYNC SELECT
> Analog Sync	-H-V
DVI Sync	+H+V

Figure 4-14.Output Sync Select Menu (sample)

The Output Sync Select Menu enables you to independently adjust the output sync polarity of the Analog and DVI outputs. The following functions are available:

•Analog Sync — This field sets the analog output sync polarity.

~

~

Values: CSync, -H-V, -H+V, +H-V, +H+V

Default: -H-V

•DVI Sync — This field sets the DVI output sync polarity.

~

~

Values: -H-V, -H+V, +H-V, +H+V

Default: +H+V

d~ãã~

From the Output Menu, select Gamma to specify the output Gamma.

•Adjustment range: 1.0 to 3.0, in steps of 0.1

•Default: 1.0

p~îÉ=lìíéìí=`çåÑáÖ

From the Output Menu, select Save Config to save the current output configuration. A message is briefly shown, after which the system returns to the Output Menu.

Saving Output Config

Figure 4-15.Saving Output Configuration Message

DCS-200 • User’s Guide 49