Barco manual oÉëÉí=`çåÑáÖ, p~îÉ=`çåÑáÖ, Operation, File Association Menu, DCS-200 User’s Guide

4. Operation

Using the Setup Menu

must match the input’s timing. For example, if the input uses NTSC (720 x 480) timing, that input cannot use a configuration file that uses WXGA (1280 X 768).

When you delete user-defined configuration files, those files are no longer available for use by any input.

For more information about using input configuration files, refer to the following sections:

•

•

•

•

•

Reset Config

Save Config

Delete Config

Recall Config

File Association Menu

oÉëÉí=`çåÑáÖ

From the Input Menu, select Reset Config to remove all user-entered configuration settings from the current input on Program, and restore the input’s parameters from the system’s internal library values. When you select Reset Config, you will be prompted to reset (SEL) or continue without resetting (ESC).

Note that if the current format was derived as a best guess, those “guess” values are restored when you press SEL.

Note

Resetting configuration parameters does not change the configuration file associated with the input — it simply assigns the restored parameters to the existing configuration file. The file number shown in the File Association Menu does not change.

p~îÉ=`çåÑáÖ

After you use the Input Menu to change one or more input settings, you can save the changes to non-volatile memory by selecting Save Config. You can save the changes to the current configuration file for the selected input, or to a different file.

„To save changes to an input’s configuration, use the following procedure:

1.Select Save Config from the Input Menu. The menu shown in the following illustration appears:

SAVE CONFIG

> File Number24

Save File

Figure 4-30.Save Config Menu (sample)

2.Select a value for File Number, or keep the default file number.

64 DCS-200 • User’s Guide