4. Operation
Using the Setup Menu
ildl=pÉíìé=jÉåì
A logo is a
LOGO SETUP
SelectionLOGO1 [1024x768]
Save Pgm to Logo Delete LOGO1
Figure 4-38. LOGO Setup Menu (sample)
Following are descriptions of each Key Setup Menu function:
•LOGO Selection — This field enables you to select the desired logo.
~
~
Selections: LOGO1, LOGO2 and LOGO3
Default: LOGO1
•
•
[resolution] — This field shows the current resolution of the saved logo, if the output resolution matches the resolution at which the logo was captured. The field shows [EMPTY] if nothing has been saved at the selected location, or [INVALID [resolution]] — e.g. [INVALID 1600x1200] — if the logo resolution does not match the current output resolution.
Because the field is not user selectable, all data is shown between brackets.
Save Pgm to Logo — Choose this field and press SEL to save the current input (on Program) to the selected logo memory register. The Save Pgm to Logo field does not appear if the logo is pending or on Program.
Important
If a key is enabled in the input source, the key becomes part of the stored logo and transitions to Program when you press TAKE.
•Delete LOGO — Choose this field and press SEL to delete the logo from the selected memory register. The Delete LOGO field does not appear if the logo is pending or on Program.
Refer to the “Using the LOGO” section on page 88 for more information on using logos.
|
| 69 |
|
