Barco DCS-200 manual RëáåÖ=íÜÉ=jÉåì=póëíÉã, Select the Input field to

4. Operation

Using the Menu System

rëáåÖ=íÜÉ=jÉåì=póëíÉã

This section lists the rules and conventions for using DCS-200’s menu system. For reference, the figure below illustrates the Setup Menu:

SETUP MENU
> Trans Time	1.0
Output	>>
Preview	>>

Figure 4-7.Setup Menu (sample)

For all setup menus, please note the following important menu rules and conventions:

•The top line names the current menu, in all capital letters.

•Subsequent lines typically display two fields:

~For a listed function, the left-hand field names the function, and the right-hand field is the function’s current parameter or value.

~For a listed sub-menu, the left-hand field names the sub-menu that you can access, and the right-hand field displays the double arrow (>>), indicating that a sub-menu is available.

•The “navigation” cursor (>) in the left-hand column indicates the current line on which action can be taken. This arrow “scrolls” as you rotate the knob.

•Scrolling:

~

~

Turn the ADJUST knob counter-clockwise (CCW) to scroll down. Turn the ADJUST knob clockwise (CW) to scroll up.

•To enter a sub-menu, scroll to the desired line and press SEL.

Note

Throughout this chapter, the term “select” is used as an abbreviation for “scroll to a menu line and press SEL.”

SSelect the Input field to...

•To change a parameter, scroll to the desired line and press SEL. The cursor changes to the “edit” cursor (#). Use the ADJUST knob to modify the value:

~

~

Turn the ADJUST knob CW to increase a value. Turn the ADJUST knob CCW to decrease a value.

•To accept a parameter or value, press SEL. The edit cursor changes back to the navigation cursor.

Note

You must press SEL to activate a DCS-200 function.

•In the “edit” mode, to exit (or cancel) without changing the original parameter, press ESC.

•To navigate back up the menu structure, press ESC. Each press takes you back up the menu tree by one level.

DCS-200 • User’s Guide 39