Barco DCS-200 manual PçÑíï~êÉ=réÖê~ÇÉ=lîÉêîáÉï, ~êÇï~êÉ=oÉèìáêÉãÉåíë, PçÑíï~êÉ=oÉèìáêÉãÉåíë

6. Upgrading Software

Software Upgrade Overview

pçÑíï~êÉ=réÖê~ÇÉ=lîÉêîáÉï

Firmware files for the DCS-200 are loaded into the hardware at power-up. These files are stored in the unit’s onboard flash memory.

The DCS-200’s system software can be easily upgraded using the following steps:

•Download the appropriate “upgrade” file from the Barco FTP site or website.

•Connect a PC (or laptop) to the DCS-200.

•Launch a web browser.

•Connect to the DCS-200 using its IP address.

•Follow the upgrade instructions in the browser.

e~êÇï~êÉ=oÉèìáêÉãÉåíë

The following hardware items are required for upgrading DCS-200 software:

•IBM compatible computer with an available Ethernet port

•Local Ethernet network, including an Ethernet switch

pçÑíï~êÉ=oÉèìáêÉãÉåíë

The following list outlines software requirements for upgrading the DCS-200’s software:

•Ensure that your PC (or laptop) uses the Windows® 2000 or Windows XP operating systems.

•Ensure that your PC (or laptop) has a web browser installed, such as Windows Internet Explorer® or Mozilla Firefox®.

Software files can be downloaded from either the Barco Folsom FTP site or the Barco website, as described in the following “Downloading Software” section.

108 DCS-200 • User’s Guide