Barco DCS-200 aÉäÉíÉ=`çåÑáÖ, Operation, Saving Input File, Save Input Cfg?, SEL = Yes ESC = No

4. Operation

Using the Setup Menu

If you save to another configuration file, the File Association Menu is updated to associate the new file to the current input. For more information about the File Association Menu, refer to the “File Association Menu” section on page 79.

Important

You can assign a configuration file to more than one input. If you do so, you must exercise caution when deleting the file, because it will be deleted for all inputs.

3.Scroll down to Save File and press SEL.

A confirmation message is briefly displayed, after which the system returns to the Input Menu.

Saving Input File

Figure 4-31.Saving Input File message (sample)

If you change a setting in the Input Menu and press ESC without saving changes, your change will not be restored the next time you select the input or power up the system. The system displays the following prompt:

Save Input Cfg?

<SEL> = Yes

<ESC> = No

Figure 4-32.Save Input Configuration Prompt (sample)

•

•

Press SEL to save changes. Press ESC to exit without saving.

aÉäÉíÉ=`çåÑáÖ

From the Input Menu, select Delete Config to delete any saved configuration file. A deleted configuration file cannot be recalled by any input.

After you delete a configuration file, what happens the next time you select an input that uses the file depends on whether In Auto Acquire is ON (in the User Preference Menu). When In Auto Acquire is ON and an input does not have a saved configuration file, the DCS-200 does a full sync (timing) acquisition on the selected input signal.

When In Auto Acquire is OFF, the system will use the configuration file defined in the File Association Menu, to the greatest extent possible. If the input does not have a saved configuration file, the DCS-200 displays the “Invalid Signal” message and the video output is black.

For more information about In Auto Acquire, refer to the “Understanding Auto Acquire” section on page 86 and the “In Auto Acquire” section on page 70.

DCS-200 • User’s Guide 65