4. Operation
Understanding
råÇÉêëí~åÇáåÖ=cêçåíJm~åÉä=içÅâçìí
The
•
•
Full lockout mode, which locks the front panel from all source selections
Executive mode, which locks all front panel selections except the nine input buttons (1 through 8 and SDI) and LOGO. In executive mode, the user can transition from one input source to another without pressing TAKE.
cìää=içÅâçìí=jçÇÉ
In the full lockout mode:
•
•
•
All button pushes and all turns of the rotary knobs will be ignored.
All Ethernet and serial communications commands will function normally. All button lights will continue to reflect the proper state of the inputs.
Use the following steps to fully lock and unlock the front panel:
1.Press and hold the SEL and ESC buttons simultaneously for 3 seconds. Once this button combination has been detected, the following display appears:
Front Panel
Lockout Enabled
Figure 4-77. System Message: Lockout Enabled
2.To disable the front panel full lockout mode, press and hold the SEL and ESC buttons simultaneously for 3 seconds. When the button combination is detected, the system returns to the menu that was displayed before full lockout mode was enabled.
bñÉÅìíáîÉ=içÅâçìí=jçÇÉ
From the System Menu, select Executive Mode to initiate a limited
•
•
Button pushes will be ignored for all buttons except the nine input buttons and LOGO. All turns of the rotary knobs will be ignored.
To take an input source to Program, press the input or LOGO button without pressing TAKE. The transition is seamless, even if you have Auto Take (in the User Preference Menu) turned off.
•
•
All Ethernet and serial communications commands will function normally. All button lights will continue to reflect the proper state of the inputs.
|
| 101 |
|
