Barco manual cçêã~í=`çååÉÅíáçå=q~ÄäÉ, Installation, DCS-200 User’s Guide

3. Installation

Format Connection Table

3.GUI connection — to configure your system to run from the built-in web-based GUI, perform the following steps:

a.Ensure that your PC (or laptop) uses Windows® 2000 or XP.

b.Ensure that your PC (or laptop) has a web browser installed, such as Windows Internet Explorer® or Mozilla Firefox®.

c.Ensure that your PC is using Java Version 6 or later.

d.Connect the DCS-200’s Ethernet port to a Switch.

e.Connect the Switch to your PC (or laptop).

This completes the required “physical” connections. Refer to Chapter 5, “GUI

Operations” on page 103 for installation and operating instructions.

4.Communications connection — two methods are available for remote control:

a.Connect the DCS-200’s Ethernet port to an Ethernet switch, and connect the switch to the other Ethernet devices in your local system. This enables you to communicate with the DCS-200 via Telnet. In Appendix B, refer to the “Communicating with DCS-200” section on page 127 for details.

b.For a serial remote connection, connect the DCS-200’s Serial port to the serial port of a laptop or a PC. In Appendix B, refer to the “Communicating with DCS-200” section on page 127 for details

This completes system signal installation. Please continue with system setup, menu orientation and operations, as outlined in Chapter 4, “Operation” on page 33.

cçêã~í=`çååÉÅíáçå=q~ÄäÉ

Use the following table to connect various source formats to the DCS-200, using the analog HD-15 connectors (on Inputs 1 through 6). Please note:

•

•

RGB format — typical devices: Computers

YUV or YPbPr (Betacam) format — typical devices: DVD player, Betacam deck

Using a customer supplied VGA to 5 x BNC breakout cable, multiple input combinations are possible. Cells with checks denote the connections required for the indicated format.

Table 3-2.Analog Input Combinations using Breakout Cable

Breakout Cable	Composite	S-Video			YUV	RGB	RGB	RGB
Wire Color	Video		(Y/C)	(YPbPr)		Sync on Green	Comp Sync	Separate H V
R				3	(Pr)	3	3	3
G	3	3	(Lum)	3	(Lum)	3	3	3
B		3	(Chrom)	3	(Pb)	3	3	3
H Sync							3	3
V Sync								3

Please contact Barco Technical Support for information on obtaining breakout cables. In Appendix C, refer to the “Contact Information” section on page 160 for details.

32 DCS-200 • User’s Guide