Barco DCS-200 manual QóéÉ, `çäçêëé~ÅÉ, 1024x768 @59.94 Adjust On Preview

4. Operation

Using the Setup Menu

those changes on the Preview source — while the Program source remains unchanged.

INPUT	1024x768 @59.94
> Adjust On	Preview

Figure 4-23.Adjust On Field

If both paths are using the same input source, only the selected path is modified.

When LOGO is the input for the Adjust On selection, all the Input Menu values except Adjust On are bracketed.

qóéÉ

In the Input Menu, the Type field shows the currently selected input type, and enables you to change the type if required. The available types depend on the selected input:

•

•

•

•

For inputs 1 - 6: CVBS, Y/C, YPBPR, RGB/HD-YUV

For inputs 7 - 8 (when Digital): DVI

For inputs 7 - 8 (when Analog): CVBS, Y/C, YPBPR, RGB/HD-YUV

For the SDI input: [SDI]

Note

The SDI input always shows its type in brackets (e.g., [SDI]), given that this input type cannot be changed.

`çäçêëé~ÅÉ

From the Input Menu, select Colorspace to change the color space for the selected input on Program. Values depend on the selected input. Please note:

•

•

•

•

The default selection for YPbPr or YUV is SMPTE. In Appendix A, refer to the

“Format Table” on page 122 for information on the formats that are RGB, SMPTE or both. When both formats are listed, the first item in the list is the default.

The Colorspace Menu allows selection between these two values when the input is analog (excluding CVBS, Y/C) or DVI.

When either the CVBS or Y/C input is selected, only [SMPTE] is shown.

When the following formats are detected as either SD-SDI or HD-SDI, only [SMPTE] is shown.

~

~

~

~

~

~

~

~

NTSC (480i)

PAL (576i) 1280x720p @50 1280x720p @59.94 1280x720p @60 1920x1080p @23.98 1920x1080p @24 1920x1080p @25

~

~

~

~

~

~

~

1920x1080p @29.97 1920x1080p @30 1920x1080sF@23.98 1920x1080sF@24 1920x1080i @50 1920x1080i @59.94 1920x1080i @60

56 DCS-200 • User’s Guide