4. Operation
Understanding
Use the following steps to enable and disable executive lockout mode:
1.From the Setup Menu, choose the System Menu.
2.Select Executive Mode. The following submenu appears:
EXECUTIVE MODE
<SEL> = Enable
<ESC> = Cancel
Figure 4-78. Executive Mode Menu (sample)
3.Press SEL. The confirmation message shown in the following illustration appears:
Executive Mode
Enabled
Figure 4-79. Executive Mode Confirmation Message
4.Press an input button or LOGO.
The button will blink “fast” to indicate that the system is performing an action such as an auto acquire, file association, or another action. When the system completes its tasks for the input, the button blinks “slow” to indicate that the input is ready to be taken to Program. The input source signal automatically goes to Program without requiring a Take, regardless of your Auto Take setting.
5.To disable the front panel executive lockout mode, press and hold the SEL and ESC buttons simultaneously for 3 seconds. When the button combination is detected, the system returns to the menu that was displayed before executive lockout mode was enabled.
102 |
| |
|
