4. Operation

Using Black

_ä~Åâ=^ìíç=q~âÉ=lå=

When the “Black Auto Take” function is ON in the User Preference Menu, you do not need to press TAKE to perform a transition to/from black. The transition occurs immediately, once BLACK is pressed.

„Use the following steps to transition to/from black, when Black Auto Take is ON:

1.Press BLACK. The system immediately transitions to/from black, at the current transition rate.

Please note:

~If the transition is “to” black, the BLACK button blinks fast during the transition interval, then lights solid when black is on Program.

~If the transition is “from” black, the BLACK button blinks fast during the transition interval, then automatically turns off when the selected source is fully on Program.

Important

When the Black Auto Take function is ON, if a different source is pending when TAKE is pressed, that source remains pending (blinking) after black is fully reached. The system does not transition to the pending source, and sources do not flip-flop. If desired, you can transition to the pending source underneath black, by pressing TAKE in the normal manner, and then pressing BLACK to immediately fade up to the new source.

94

 

DCS-200 • User’s Guide

 

Page 94
Image 94
Barco DCS-200 manual ~Åâ=ìíç=q~âÉ=lå=