Honeywell 9900 Key Description Default Available Values Private Key, Priv Key, WEP Key, Mode

Profile Subsections

Each Profile subsection contains the keys that configure the radio connection from the terminal to the network.

Key	Description	Default	Available Values
		Value
Private Key	Private keys are used with certain types of	N/A	Enter the address on the
	EAP authentication.		Dolphin terminal of the private
			key.
			The private key must be
			located on the Dolphin
			terminal!
Priv Key	Private keys can be locked by passwords.	N/A	Enter the password that
Password			unlocks the private key.
WEP Key	Mode being used by the WEP keys (in Key1–	N/A	ASCII uses all alpha numeric
Mode	Key4 keys).			characters.
	Key validation occurs when DeviceConfig is		HEX uses only numerics and
				A-F.
	loaded on the terminal (often during
	AutoInstall), not when you save the		Valid lengths are as follows:
	DeviceConfig.exm file.		•	64-bit ASCII=5
			•	128-bit ASCII=13
			•	64-bit HEX=10
			•	128-bit HEX=26
WEP Key1–	In fields Key 1—Key 4, enter the specific key.	N/A	User-defined
Key4	The format of each key must match the key
	length type selected in the WEP Key Mode
	key.
	To use dynamic keys in your configuration,
	leave all the key fields blank.
Active Key	Enter the number of the key that you want to	N/A	1, 2, 3, or 4
	be active in this configuration.

3 - 6	Rev A	Dolphin® Power Tools User’s Guide
	8/6/08