Honeywell 9900 Available Data Formatting Commands, Send Commands, Move Commands, Search Commands

Available Data Formatting Commands

These are the data formatting operations applied to the bar code data. The entire command string is entered into the Format key.

	Command	Description
	Send Commands
	F1xx	Send all characters followed by “xx” key or function code, starting from current cursor
		position.
	F2nnxx	Send “nn” characters followed by “xx” key or function code, starting from current cursor
		position.
	F3ssxx	Send up to but not including “ss” character (Search and Send) starting from current
		cursor position, leaving cursor pointing to “ss” character followed by “xx” key or function
		code.
	F4xxnn	Send “xx” character “nn” times (Insert) leaving cursor in current cursor position.
	E9nn	Send all but the last “nn” characters, starting from the current cursor position.
	Move Commands
	F5nn	Move the cursor ahead “nn” characters from current cursor position.
	F6nn	Move the cursor back “nn” characters from current cursor position.
	F7	Move the cursor to the beginning of the data string.
	EA	Move the cursor to the end of the data string.
	Search Commands
	F8xx	Search ahead for “xx” character from current cursor position, leaving cursor pointing to
		“xx” character.
	F9xx	Search back for “xx” character from current cursor position, leaving cursor pointing to
		“xx” character.
	E6xx	Search ahead for the first non “xx” character from the current cursor position, leaving
		cursor pointing to non “xx” character.
	E7xx	Search back for the first non “xx” character from the current cursor position, leaving
		cursor pointing to non “xx” character.
	Miscellaneous Commands
	FExx	Compare character in current cursor position to the character “xx.” If characters are
		equal, increment cursor. If characters are not equal, no format match.
	EC	Check to make sure there is an ASCII number at the current cursor position.If character
		is not numeric, format is aborted.
Dolphin® Power Tools User’s Guide			Rev A	5 - 13
			8/6/08