Honeywell 9900 manual MobiConrol Section

MobiConrol Section

If the terminal includes the MobiControl Bootstrap Agent (/IPSM/MCBootstrapAgent.exe), then DeviceConfig can be used to configure the terminal to connect to a MobiControl Server and download the appropriate agent to the device.

This section is disabled by default and should only be enabled when configuring the device to connect to the MobiControl Server for the first time.

The root level of the MobiControl section contains the main ConfigPath. By default, this is “\IPSM\MCBootstap.ini.”

Key	Description	Default	Available Value
		Value
Device Subsection
NameType	Mandatory	1	1=Use Device ID as the device name
	The name the device will register as on		2=Use custom name
	the server.
DeviceName	Mandatory when NameType is set to 2.	N/A	X=Custom name can contain
	This is the custom name of the device.		customized macros; e.g.,
			“%AUTONUM%”
DeviceClass	Optional	N/A	X=The specific rule tag. Please refer
	The rule tag of the Add devices rule.		to MobiControl Help on how to
	When the rule tag is not specificed here,		create an open rule.
	the device will use an Open, Add
	devices rule.
DeviceIDType	Optional	3	1=HAL Old Device ID
	Specifies what is used for the device ID.		2=HAL New Device ID
			3=HAL UUID
			4=User Defined
			5=Server specified
			6=MAC
Info Subsection
SiteName	Mandatory	N/A	X=MobiControl Server name
	This is the site name of the MobiControl
	Server
Method	Mandatory	1	1 (Honeywell standard)
	The installation method.
Comm Subsection
Broadcast	Optional	0	0=Disable
	Enable broadcasting for discovering		1=Enable
	server addresses.
RetryDelay	Optional	30000	X=Milliseconds
	Retry delay time when connection to the
	server fails.
Connection Subsection
DeploySvr1	Mandatory when Broadcast key is	N/A	X=IP address:port
	disabled.		e.g., 192.168.1.238:5494
	This is the MobiControl Server IP
	address and port.

Dolphin® Power Tools User’s Guide	Rev A	3 - 11
	8/6/08