Comm Section | Honeywell 9900 guide

Comm Section

The serial port settings in the Comm section determine the interaction between ScanWedge and the serial port.

Comm Section	Description	Default	Available Values
Key		Value


Enable	Enables (or disables) ScanWedge to	0	0=Disabled; no data is received
	receive and interpret data from the		1=Enabled; ScanWedge receives
	serial port.		data from the serial port
			(specified in the Port key) as
			keystrokes to the foreground
			application.

AutoConnect	Enables or disables the auto-	0	0=Disabled; ScanWedge opens the
	connection between ScanWedge		serial port immediately at startup
	and the serial port.		and doesn’t close until
	and the serial port.		ScanWedge is closed. This is the
			ScanWedge is closed. This is the
			recommended setting when the
			serial port is port 2 or 3.
			1=Enabled; ScanWedge connects to
			the serial port when a power
			source is detected and
			disconnects when the power
			source is removed/not detected.

Port	Specifies the serial port to use to		The use of port 4/6 is not
	connect to ScanWedge.		encouraged.
	Note: This setting is ignored for Port 4.

FlowControl	Specifies the flow control method to	4	1=Software (Xon-Xoff)
	use–software only, hardware only, or		2=Hardware
	software and hardware.		3=Hardware and software
	Note: This setting is ignored for Port 4.		4=No flow control
	Note: This setting is ignored for Port 4.

BaudRate	Specifies the baud rate for the serial	38400	X=The appropriate baud rate.
	port.
	Note: This setting is ignored for Port 4.

Parity	Specified the parity for the connection.	0	0=No parity
			1=Odd parity
	Note: This setting is ignored for Port 4.		2=Even parity
			3=Mark parity
			4=Space parity

DataBits	Specifies the number of bits per byte to	8	X=Number of bits per byte
	use.
	Note: This setting is ignored for Port 4.

StopBits	Specified the number of stop bits to	0	0=1 stop bit
	use.		1=1.5 stop bits
			2=2 stop bits
	Note: This setting is ignored for Port 4.

5 - 6	Rev A	Dolphin® Power Tools User’s Guide
	8/6/08

Image 84

Honeywell 9900 manual Comm Section

Contents

Dolphin Power Tools Disclaimer TrademarksPatents Other Trademarks Table of Contents ScanWedge Print Power Tools Rev a Accessing and Upgrading Power Tools Dolphin Power Tools OverviewAutoInstall Autorun Battery Analyzer Windows Mobile 5/6 Windows CE Second Edition Power Tools Main Window Software RequirementsDolphin Terminals Desktop Exiting the Power Tools Main Window View OptionsTap File Exit ESC Icon Name Description Network Additional Dolphin Power Tools Name Function Storage Location Access Location AutoInstallInstallerCE BTPrint Upgrading Power Tools Acquiring Upgrades Installing an Upgrade to the Workstation Rev a Dolphin Power Tools User’s Guide Rev a Installing an Upgrade on the Terminal Folder on the WorkstationDevice Image Docs Dolphin Power Tools User’s Guide Rev a Rev a EZConfig EZConfig EditorEZConfig Client Overview EZConfig Editor Installing EZConfig on the WorkstationTypes of Configuration Files Sample EXM Files Opening EZConfig Editor on the Workstation Menu and Toolbar OptionsFile Menu Menu Item Description New Edit Menu View Menu Tools Menu Opening EXM Files Opening EXM Files on the WorkstationOpening Remote EXM Files Working with Open EXM Files Status BarWorking with Sections Selected Section Edit Menu Options Modifying Section Names Modifying Section DescriptionsMoving Sections Section Locks Section-Level Merge Modes Dolphin Power Tools User’s Guide Rev a Working with Keys Modifying Key Names Modifying Key ValuesModifying Key Descriptions Moving Keys Lock Type Status Bar Description Effect Indicator Name Lock Saving to the DeviceKey Types Read Only Creating New Configuration Documents Associating Applications Default Application Association Registry DocumentsUpdating the Registry on the Terminal Creating Registry Documents Click File Save As Adding Registry Keys Processing Registry Documents on the Terminal Persistent Registry Documents Creating Bar Codes Document TypesBar Code Type Time and Date Stamp Bar Code Sheet Generating Bar CodesBar Codes Tab Field/Option Description Display Full Contents Field/Option Description Remote PathSimplified # Bar codes to Advanced Tab Persist Bar Code Settings Field Description Merge eachSection… Temporary Information at the Bottom of Tab Windows Printing and Saving Options Click Print on this window to print your bar codes Converting Known INI and MNU Files Known INI and MNU FilesConverting Files Upgrading Dolphin Terminals EZConfig Editor on the Terminal Accessing EZConfig EditorTap Start Power Tools EZConfig Utilities Available Menus Editing SectionsModifying Text Editing Keys Launching Associated Applications Args Restart EZConfig Client Using EZConfig ClientTap EZConfig Utilities EZConfig Editor Storage Location EXM File Processing EZConfig Client Window Multiple Bar CodesField Description Package ID Read # box Command Line Arguments Launching EZConfig Client with a HotKeyScanWedge Rev a DeviceConfig DeviceConfig.exm FileSettings in the Wlan Supplicant DeviceConfig.exm Sections and Keys WiFi SectionConnections Section Beam Section Tcpip Section DhcpDNS Wins Security Section Supplicant SectionProfile Subsections Ssid PSK Key Description Default Available Values Private Key Priv KeyWEP Key Mode Bluetooth Section Bluetooth Default Printer ValuesObtaining the MAC Address ActiveSync Section GSM SectionAPN System Section About SectionDevice ID Tab DeviceName Restrictions AutoInstall RAM SectionApplications Section Internet Explorer Section MobiConrol Section Boot Launching DeviceConfig.exe Manually Temporary Option for Bar Code Deployment Rev a Autorun and AutoInstall Settings SectionAutorun Autorun.exm File Settings Section Keys Programs’ Subsections Editing the Autorun.exm File Adding a Program SubsectionKeys in Each Programs’ Subsection Pnpid Sample Autorun Configuration File Copying a FileStart Options Rfon GsmonBton Rfgsmbtoff ALL of the strings specified in the Pnpid setting Nonpnpid Applying Startup Options to the Autorun Configuration File AutoInstall Program Install Locations AutoInstall.exm CancelHaltOnError MaskPassword Command Line Arguments Key Function Default Available Values Password Command Bar Menu ScanWedgeEnabling ScanWedge Enabling ScanWedge at Startup Modifying the ScanWedge Configuration File Disabling ScanWedgeScanWedge.exm Sections Basic Values Settings Section Accept EZConfig SoundConnectMessageConnect GoodScanWav BadScanWav Comm Section EnablePrefixData EnableSuffixData Decode Section AimerDelay AimerDelayALRDefaultEnabledSymbo AimerDurationALR GoodScanLen BadScanFreqBadScanLen Centering Section CenteringTop=CenteringBottom= CenteringLeft= Subsection Description Default Available Values Key Format Formatting SectionFormatting Subsections CodeID Available Data Formatting Commands Send CommandsMove Commands Search Commands Code ID FBnnxxyy…zzE4nnxx1xx2yy1 Yy2…zz1zz2 EAN-8 IsbtMSI OCR-A UCC/EAN-128 UPC-AUPC-E0 0x45 Symbologies Section Aztec MesasCodablock Code OCR Straight 2 Industrial Tcif Linked CodeTLC39 Telepen Settings are in the form Ascii Key = Virtual Key, ShiftMode VK Virtual Key Mapping Section Virtual Key Codes Table Virtual Key Codes Table Vkescape VKA VKQ Vksubtract Quit Additional Power Tools This chapter describes the following Power Tools To Enable BattMon To Disable BattMonTap this icon to open the Command bar menu BattMon To Check Battery Power Manually InstallerCE To Manually Install a CAB FileLocation To Enable HotKeys Buttons SettingTo Disable HotKeys HotKeys Tap this icon to open the Command bar menu for HotKeys Indicator Keyboard is in … Keyboard StatusKeyboard Status Menu Tap this icon to open the Keyboard Status menu for Accessing the Keyboard Status Power Tool Notification MenuShut down Keyboard Status Run Keyboard Status with no icon To Enable NoSIP To Disable NoSIPScreen . Tap this icon to open the Command bar menu NoSIP To Enable RASMan To Disable RASManRASMan PPP RASMan Configuration File Key Description Default Available Values Retry ShowErrorStatusMessageDelay StopOnCriticalError Reboot Warm BootCold Boot Rebooting the Dolphin terminal To Wake the Dolphin Terminal from Suspend Mode SuspendTo Suspend the Dolphin Terminal SysInfo To See System InformationTo Save the System Information to a Text File Viewing Options To Upload SYSINFO.txt to a WorkstationYou cannot change system information by editing the text Sample SysInfo File System DATE/TIMESystem Info CPU Info System Parameters Network InfoRadio Info Ipsm Power Status Store InfoSystem Version Global Memory RAM Info Imager Info Using the Battery Analyzer Operating Temperature=0-50CAC Power Supply Requirements Analyzing a Battery Stopping an Analyze CycleAnalyze Cycle Steps Automatic Shut Down Advanced Mode Log File Registry Power Tools Editing the Registry Rev a Menus ImportExport Menu Item Description Copy Menu Item Description Rename Renames a registry entry FindFind Next Exporting Specific Registry Settings Importing Registry FilesOther Export Options RegRestore Cold BootBacking Up the Registry Restoring the Registry RegBackup.exm SectionsModifying SyChip & Philips Sections Mode and Kernel Check KernelCheck=EnabledMode KernelCheck Argument Description Export filename Import filenameExm filename Section Registry Edit Options in EZConfig Accessing Network Utilities Network Utilities IP Config Displaying the Terminal’s IP Configuration About Tab Using the Input Tab PingTTL TOS Reading the Output Tab DNS address required Field Description Command Text under CommandRoute Output tab To Add a Route To Delete a Route To Clear Gateway Entries Dolphin Power Tools User’s Guide Rev a WiFi Status Setup TabTap Start Power Tools Network Utilities WiFiStatus CAM Status Tab Bssid Tab Backup Radio Settings Restore Radio SettingsRestore Radio Settings Default EZMenu Configuration Files Sample Menu Configuration FilesEZMenu Running Easy Menu Modifying Menu Configuration Files Creating Menu Configuration Files Menu Configuration File Sections MenuEntries Subsections Child Section Keys Exit Icon RF radio is Enabled GSM radio is enabledBluetooth radio is enabled RF, GSM, & Bluetooth radios are disabled 7300 79XX Pnpid Booting the Terminal to the Application Window Locking Down the Application Window Rev a SetRAM Windows Mobile 6.0 Memory Accessing SetRAM RAM Memory Allocation in DeviceConfigField Value Description Total Installed RAM SetRAM Window RAM Memory Restrictions XX% Rev a Print Power Tools Print DemoBTPrint.exe Calling a Bluetooth Printer BTPrintIrDAPrintCE Calling an IrDA Printer Customer Support Technical AssistanceOnline Technical Assistance Rev a Page Honeywell