Settings Section Keys, Programs’ Subsections | Honeywell 9900

When processing files, the terminal behaves as though disabled sections are not there and moves on to the next enabled section.

Settings Section Keys

Note: This section and most of its keys are locked, which means that you can change the value but not the name or description.

Key	Function	Default	Available Values


Version	Stores the EXM file version.	22	You cannot modify this
			value!

ByPassKey	Defines the key that can be pressed to bypass	42=SCAN key
	Autorun

StartMenu	Enables and disables the Start menu during	1	0=Disable; the Start
	Autorun		menu is disabled
			during Autorun.
			1=Enable; the Start
			menu is enabled.

Debug	Controls the debug function at AutoInstall.	0	0=Disable
			1=Enable, an
			autorun.log file is
			created in the
			\IPSM folder.
TestMode	Runs the terminal in test mode and tests the	0	0=Disable
	functionality of AutoInstall. This is a diagnostic tool.		1=Enable
	When enabled, applications stored in the
	AutoInstall folder, including the radio drivers, are
	not loaded during startup.

EZConfigKey	Specifies a key that launches EZConfig Client	9=Tab	Empty=You must launch
	before Autorun starts processing the Programs	key	EZConfig Client to
	section; i.e., before Autorun starts launching		scan bar codes from
	programs.		EZConfig Editor

Programs’ Subsections

Here are a few of the standard child sections of the Programs section:

Section	Description


Update	Attempts to launch an Update.exe application from the SD (Secure Digital) card, if one exists.

AutoRun	Attempts to process an Autorun configuration file from the SD card (if one exists); for example,
SC1 & SC2	to install CAB files from the AutoInstall folder in the SD card. One section applies to cold boots
	and the other to warm boots.

Reset	Initiates a warm boot after the cold boot during startup. Do NOT disable the Reset section!

Note: Other subsections launch the executable entered in the Program (see page 4-3)key.

4 - 2	Rev A	Dolphin® Power Tools User’s Guide
	8/6/08

Image 70

Honeywell 9900 manual Settings Section Keys, Programs’ Subsections

Contents

Dolphin Power Tools Patents DisclaimerTrademarks Other Trademarks Table of Contents ScanWedge Print Power Tools Rev a AutoInstall Autorun Battery Analyzer Accessing and Upgrading Power ToolsDolphin Power Tools Overview Windows Mobile 5/6 Windows CE Second Edition Dolphin Terminals Power Tools Main WindowSoftware Requirements Desktop Tap File Exit ESC Exiting the Power Tools Main WindowView Options Icon Name Description Network InstallerCE Additional Dolphin Power ToolsName Function Storage Location Access Location AutoInstall BTPrint Upgrading Power Tools Acquiring Upgrades Installing an Upgrade to the Workstation Rev a Dolphin Power Tools User’s Guide Rev a Device Image Installing an Upgrade on the TerminalFolder on the Workstation Docs Dolphin Power Tools User’s Guide Rev a Rev a EZConfig Client EZConfigEZConfig Editor Overview Types of Configuration Files EZConfig EditorInstalling EZConfig on the Workstation Sample EXM Files File Menu Opening EZConfig Editor on the WorkstationMenu and Toolbar Options Menu Item Description New Edit Menu View Menu Tools Menu Opening EXM Files on the Workstation Opening EXM FilesOpening Remote EXM Files Working with Sections Working with Open EXM FilesStatus Bar Selected Section Edit Menu Options Modifying Section Descriptions Modifying Section NamesMoving Sections Section Locks Section-Level Merge Modes Dolphin Power Tools User’s Guide Rev a Working with Keys Modifying Key Descriptions Modifying Key NamesModifying Key Values Moving Keys Key Types Lock Type Status Bar Description Effect Indicator Name LockSaving to the Device Read Only Creating New Configuration Documents Associating Applications Registry Documents Default Application AssociationUpdating the Registry on the Terminal Creating Registry Documents Click File Save As Adding Registry Keys Processing Registry Documents on the Terminal Persistent Registry Documents Bar Code Type Creating Bar CodesDocument Types Time and Date Stamp Bar Codes Tab Bar Code SheetGenerating Bar Codes Field/Option Description Display Simplified Full ContentsField/Option Description Remote Path # Bar codes to Advanced Tab Section… Persist Bar Code SettingsField Description Merge each Temporary Information at the Bottom of Tab Windows Printing and Saving Options Click Print on this window to print your bar codes Known INI and MNU Files Converting Known INI and MNU FilesConverting Files Upgrading Dolphin Terminals Accessing EZConfig Editor EZConfig Editor on the TerminalTap Start Power Tools EZConfig Utilities Editing Sections Available MenusModifying Text Editing Keys Launching Associated Applications Args Restart Tap EZConfig Utilities EZConfig Editor EZConfig ClientUsing EZConfig Client Storage Location EXM File Processing Field Description Package ID EZConfig Client WindowMultiple Bar Codes Read # box Launching EZConfig Client with a HotKey Command Line ArgumentsScanWedge Rev a DeviceConfig.exm File DeviceConfigSettings in the Wlan Supplicant Connections Section DeviceConfig.exm Sections and KeysWiFi Section Beam Section DNS Tcpip SectionDhcp Wins Profile Subsections Security SectionSupplicant Section Ssid PSK WEP Key Key Description Default Available Values Private KeyPriv Key Mode Bluetooth Default Printer Values Bluetooth SectionObtaining the MAC Address GSM Section ActiveSync SectionAPN Device ID Tab System SectionAbout Section DeviceName Restrictions Applications Section AutoInstallRAM Section Internet Explorer Section MobiConrol Section Boot Launching DeviceConfig.exe Manually Temporary Option for Bar Code Deployment Rev a Autorun Autorun and AutoInstallSettings Section Autorun.exm File Settings Section Keys Programs’ Subsections Keys in Each Programs’ Subsection Editing the Autorun.exm FileAdding a Program Subsection Pnpid Copying a File Sample Autorun Configuration FileStart Options Bton RfonGsmon Rfgsmbtoff ALL of the strings specified in the Pnpid setting Nonpnpid Applying Startup Options to the Autorun Configuration File AutoInstall Program Install Locations HaltOnError AutoInstall.exmCancel MaskPassword Command Line Arguments Key Function Default Available Values Password Enabling ScanWedge Command Bar MenuScanWedge Enabling ScanWedge at Startup ScanWedge.exm Sections Modifying the ScanWedge Configuration FileDisabling ScanWedge Basic Values Settings Section SoundConnect Accept EZConfigMessageConnect GoodScanWav BadScanWav Comm Section EnablePrefixData EnableSuffixData Decode Section DefaultEnabledSymbo AimerDelayAimerDelayALR AimerDurationALR BadScanFreq GoodScanLenBadScanLen CenteringBottom= Centering SectionCenteringTop= CenteringLeft= Formatting Subsections Subsection Description Default Available Values Key FormatFormatting Section CodeID Move Commands Available Data Formatting CommandsSend Commands Search Commands E4nnxx1xx2yy1 Code IDFBnnxxyy…zz Yy2…zz1zz2 MSI EAN-8Isbt OCR-A UPC-E0 UCC/EAN-128UPC-A 0x45 Codablock Symbologies SectionAztec Mesas Code OCR Industrial Tcif Linked Code Straight 2TLC39 Telepen Settings are in the form Ascii Key = Virtual Key, ShiftMode VK Virtual Key Mapping Section Virtual Key Codes Table Virtual Key Codes Table Vkescape VKA VKQ Vksubtract Quit Additional Power Tools This chapter describes the following Power Tools Tap this icon to open the Command bar menu To Enable BattMonTo Disable BattMon BattMon To Check Battery Power Manually To Manually Install a CAB File InstallerCELocation To Disable HotKeys To Enable HotKeysButtons Setting HotKeys Tap this icon to open the Command bar menu for HotKeys Keyboard Status Menu Indicator Keyboard is in …Keyboard Status Tap this icon to open the Keyboard Status menu for Shut down Keyboard Status Accessing the Keyboard Status Power ToolNotification Menu Run Keyboard Status with no icon Screen . Tap this icon to open the Command bar menu To Enable NoSIPTo Disable NoSIP NoSIP RASMan To Enable RASManTo Disable RASMan PPP RASMan Configuration File StatusMessageDelay Key Description Default Available Values RetryShowError StopOnCriticalError Cold Boot RebootWarm Boot Rebooting the Dolphin terminal Suspend To Wake the Dolphin Terminal from Suspend ModeTo Suspend the Dolphin Terminal To See System Information SysInfoTo Save the System Information to a Text File To Upload SYSINFO.txt to a Workstation Viewing OptionsYou cannot change system information by editing the text System Info Sample SysInfo FileSystem DATE/TIME CPU Info Radio Info System ParametersNetwork Info Ipsm System Version Power StatusStore Info Global Memory RAM Info Imager Info AC Power Supply Using the Battery AnalyzerOperating Temperature=0-50C Requirements Analyze Cycle Steps Analyzing a BatteryStopping an Analyze Cycle Automatic Shut Down Advanced Mode Log File Registry Power Tools Editing the Registry Rev a Export MenusImport Menu Item Description Copy Find Menu Item Description Rename Renames a registry entryFind Next Importing Registry Files Exporting Specific Registry SettingsOther Export Options Backing Up the Registry RegRestoreCold Boot Restoring the Registry Modifying RegBackup.exmSections SyChip & Philips Sections Mode Mode and Kernel CheckKernelCheck=Enabled KernelCheck Exm filename Argument Description Export filenameImport filename Section Registry Edit Options in EZConfig Accessing Network Utilities Network Utilities IP Config Displaying the Terminal’s IP Configuration About Tab TTL Using the Input TabPing TOS Reading the Output Tab DNS address required Route Field Description CommandText under Command Output tab To Add a Route To Delete a Route To Clear Gateway Entries Dolphin Power Tools User’s Guide Rev a Tap Start Power Tools Network Utilities WiFiStatus WiFi StatusSetup Tab CAM Status Tab Bssid Tab Restore Radio Settings Backup Radio SettingsRestore Radio Settings EZMenu Default EZMenu Configuration FilesSample Menu Configuration Files Running Easy Menu Modifying Menu Configuration Files Creating Menu Configuration Files Menu Configuration File Sections MenuEntries Subsections Child Section Keys Exit Icon Bluetooth radio is enabled RF radio is EnabledGSM radio is enabled RF, GSM, & Bluetooth radios are disabled 7300 79XX Pnpid Booting the Terminal to the Application Window Locking Down the Application Window Rev a SetRAM Windows Mobile 6.0 Memory Field Value Description Total Installed RAM Accessing SetRAMRAM Memory Allocation in DeviceConfig SetRAM Window RAM Memory Restrictions XX% Rev a Print Demo Print Power ToolsBTPrint.exe IrDAPrintCE Calling a Bluetooth PrinterBTPrint Calling an IrDA Printer Technical Assistance Customer SupportOnline Technical Assistance Rev a Page Honeywell