Honeywell 9900 manual Formatting Section, Formatting Subsections, CodeID, Length

Formatting Section

ScanWedge supports data formatting.

The Formatting section contains subsections and each subsection supports one data format.

Formatting Subsections

Subsection	Description	Default	Available Values
Key		Value
Format	Specifies data formatting parameters	Empty	See Available Data Formatting
			Commands on page 5-13.
CodeID	Identifies the Code ID that the bar code's	Empty	Empty=No Code ID
	symbology must have for the format to be		X=See Code ID on page 5-14.
	applied. The Code ID is a single character that
	is case-sensitive; e.g., set CodeID=j to apply
	the format to Code 128 only.
Length	Determines the length the bar code data must	Empty	Empty=Format applies to any
	have for the format to be applied.		length
			0=Format applies to any length
			X=The length

5 - 12	Rev A	Dolphin® Power Tools User’s Guide
	8/6/08