Security Section
The Security section has no keys and one child section named “Supplicant,” which contains several profile subsections.
Supplicant Section
The Supplicant section consists of a number of child sections. The default child section is named Profile1 and contains all the keys necessary to create a configuration profile for the WLAN radio.
To create multiple radio configurations, copy the Profile1 section and paste it at the root level of the Supplicant section. Then, rename that profile and configure the keys according the desired network configuration. Each child section name is arbitrary, but each name must be different.
The Supplicant section contains one key named ActiveProfile. Type in the Value equal to name of one of the desired profile child sections.
When DeviceConfig is activated on the terminal, the terminal will apply the settings in the profile specified in the ActiveProfile key. If the ActiveProfile key does not have a matching profile, the radio will be enabled by DeviceConfig but no specific radio configuration will be activated, which means that the radio will not connect to your network.
Profile Subsections
Each Profile subsection contains the keys that configure the radio connection from the terminal to the network.
Key | Description | Default | Available Values | |
|
| Value |
|
|
|
|
|
| |
|
|
|
| |
SSID | The service set identifier used to connect to | N/A | X=Your network’s SSID | |
| network; usually the network name of the |
| Any=Connect to any network | |
| access point or peer station. |
|
|
|
|
|
|
|
|
Assoc. Mode | The general association mode (sometimes | N/A | • | None (no authentication or |
| called “authentication”) of the radio. |
| • | encryption) |
|
|
| WEP | |
|
|
| • | IEEE 802.1X |
|
|
| • | |
|
|
| • | |
|
|
| • | |
|
|
| • | |
|
|
|
| |
Encryption | The encryption mode available for the | N/A | Open & Shared (WEP) | |
| association mode. |
| TKIP, | |
|
|
| CCMP (WPA) | |
|
|
|
|
|
3 - 4 | Rev A | Dolphin® Power Tools User’s Guide |
| 8/6/08 |
|
