Honeywell 9900 manual Edit Menu Options

Edit Menu Options

Select a section click Edit to see the available options.

Menu Item	Description
Rename	Activates the section name so that you can rename the section.
	Note: You cannot modify the name if the section is locked; see Section Locks (page 2-10).
Cut	Cuts a selected section.
Copy	Copies a selected section.
Paste	Pastes the section that was just cut or copied at the same level as the selected section.
Paste as Child	Pastes the section that was just cut or copied as a child of the selected section.
	Note: You can cut, copy and paste sections within an EXM file or across EXM files.
Delete	Deletes a selected section.
	Note: Because you cannot undo a delete, consider disabling rather than deleting.
Enable	Sections are enabled by default. This menu item enables sections that were previously
	disabled. You can enable a section only if its parent section is enabled.
	To enable all the keys inside a section you are enabling, SHIFT + right-click and select
	Enable All.
Disable All	Sections are enabled by default. This menu item disables sections and all of its keys.
	Disabled sections remain in the file with a gray folder .

If you disable a section that has child sections, all of its child sections (and the child section keys) are disabled automatically. The child section folders are also in gray.

When reading the EXM file, the terminal behaves as though disabled sections are not there and moves on to read the next enabled section.

Disabled sections can be removed from the EXM file permanently using the Simplify Document (see page 2-5)option. If you want to keep disabled sections in the EXM file on the workstation but not in the file deployed to the terminal, use the Simplified option (see page 2-23)when creating the bar code.

2 - 8	Rev A	Dolphin® Power Tools User’s Guide
	8/6/08