DeviceConfig.exm Sections and Keys
The sections and keys in the DeviceConfig.exm file are locked, which means that you can change values but not names or descriptions.
Section Name | Description | See Page |
|
|
|
|
|
|
Connections | Configures communication parameters. There are child sections | |
| that configure the IrDA port, the |
|
| ActiveSync connection. |
|
|
|
|
System | Configures basic system settings. | |
|
|
|
Applications | Configures software applications. | |
|
|
|
Connections Section
The Connections section contains child sections that set communication parameters on the terminal.
Beam Section
The Beam section enables and disables the IrDA port.
Radio Manager Section
In the Radio Manager, typically, you would enable the radio in the WiFi section, enable DHCP in the TCPIP section, then configure the radio settings in the Security\Supplicant\ProfileX or Security\NonSupplicant section.
WiFi Section
The keys in the WiFi section control the settings of the WLAN radio.
Key | Description | Default | Available Values |
|
| Value |
|
|
|
|
|
|
|
|
|
Enable | Enables and disables the WLAN radio. | 1 | 0=Disabled |
|
|
| 1=Enabled; if enabled, the GSM radio |
|
|
| section is disabled automatically |
|
|
|
|
PowerMode | Specifies the power save mode. | 1 | 1=Disable; radio is powered |
|
|
| constantly (power save mode is |
|
|
| not used) |
|
|
| 2=Always Enable; power save mode |
|
|
| is used |
|
|
| 3=Auto Enable; EPSParm key |
|
|
| defines radio vs. battery |
|
|
| performance |
|
|
|
|
EPSParm | When PowerMode is set to 3 (Auto | N/A | X=A value between 1 and 10, where: |
| Enable), this parameter specifies radio |
| 1=Best Radio Performance |
| vs. battery performance. |
| (Minimum) |
|
|
| 10=Best Battery Life (Maximum) |
|
|
|
|
3 - 2 | Rev A | Dolphin® Power Tools User’s Guide |
| 8/6/08 |
|
