VK (Virtual Key) Mapping Section
The virtual key map settings are located in the VKMapping section in the ScanWedge configuration file. The virtual key map settings define the virtual key that will be sent to ScanWedge for any decoded ASCII character.
The settings are in the form: ASCII Key = Virtual Key, ShiftMode
Where
•ASCII Key is an ASCII value between 0 an 255 (decimal)
•Virtual Key is the virtual key to be sent when the specified ASCII key is decoded
•ShiftMode can have the following values:
•0=the virtual key is never shifted
•1=the virtual key must be shifted
•2=the virtual key needs to be shifted if Caps Lock is off
•3=the virtual key needs to be shifted if Caps Lock is on
For detailed information about the values in this section, see Virtual Key Codes Table on page
5 - 20 | Rev A | Dolphin® Power Tools User’s Guide |
| 8/6/08 |
|
