Garmin DTC300 manual Resolving a Invalid Ribbon Error, Model

RESTRICTED USE ONLYFargo Electronics, Inc.

Resolving a Invalid Ribbon Error (continued)

Step	Procedure
2	Verify that the Ribbon Cartridge installed is designed for the correct Printer
	model.
3	Press on the Resume button.
	If the issue persists, continue to Step 4.
4	Remove the rear cover and check that the Ribbon RFID cable is securely
	connected to the Main Board (J-5) and the RFID Sensor.
	• If the connections are loose, reattach
	• Press on the Resume button..
	• If the connections are good or if the issue persists, continue to Step 5.
5	Replace the Ribbon RFID Sensor.

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 4-27