Garmin DTC300 manual Resolving a Headlift Motor or Sensor Error

RESTRICTED USE ONLY Fargo Electronics, Inc.

Resolving a Headlift Motor or Sensor Error

All Troubleshooting procedures assume that only factory-authorized supplies are in use in the Printer.

Step Procedure

1Review the following information.

•Symptom: The Printhead continuously cycles or does not cycle at all

•Printer Error State: Headlift Sensor is not detecting movement from the Headlift Cam

•LCD Error Display: Head Lift Error

•Driver Monitor Error Display: General Error

Continued on the next page

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 4-32