Garmin DTC300 manual Resolving the No Mag Installed Error, Step

RESTRICTED USE ONLY Fargo Electronics, Inc.

Resolving the No Mag Installed Error

All Troubleshooting procedures assume that only factory-authorized supplies are in use in the Printer.

Step Procedure

1Review the following information.

•Symptom: There is not Magnetic Encoder installed.

•Printer Error State: A print job with Magnetic encoding was sent with no Magnetic encoder installed in the Printer.

•LCD Error Display: No Mag Installed

•Driver Monitor Error Display: No Mag Installed

Continued on the next page

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 4-17